Retrofitted RNS-510, Changed GW, now a lot of errors

[drizzt dourdem]

The failures continue and add another, more



VCDS Version: Release 908.1
Data version: 20091018

Sunday,12,September,2010,15:49:10:46862

Chassis Type: 3C0
Scan: 01 03 08 09 15 16 17 19 25 37 42 44 46 52 53 56 62 72 7D

VIN: WV Mileage: 90400km/56171miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Cannot be reached 1100
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
56-Radio -- Status: Cannot be reached 1100
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
7D-Aux. Heat -- Status: Not registered 0011

-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Part No SW: 03G 906 018 CD HW: 03G 906 018 CD
Component: R4 2.0l PPD1.5 G 9627
Revision: --H05--- Serial number: VWZCZ000000000
Coding: 0000072
Shop #: WSC 00311 572 86198

No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 3C0-614-095-C2.lbl
Part No SW: 3C0 614 095 Q HW: 3C0 614 095 Q
Component: ESP 440 C2 H015 0003
Revision: H015 Serial number: 0658494146
Coding: 0015650
Shop #: WSC 00028 028 00001

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 3C0-907-044.lbl
Part No SW: 3C0 907 044 AA HW: 3C0 907 044 AA
Component: ClimatronicPQ46 050 0404
Revision: 00050005 Serial number: 00000000000000
Shop #: WSC 00000 000 00000

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 3C0-937-049-23-H.lbl
Part No SW: 3C0 937 049 J HW: 3C0 937 049 J
Component: Bordnetz-SG H37 1301
Revision: 00H37000 Serial number: 00000003717476
Coding: 05800F0700041A00020A00000F00000000095D435C0000
Shop #: WSC 00028 028 00001

Part No: 3C1 955 419
Component: Wischer VW461 001 0101
Coding: 00063445
Shop #: WSC 00028

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 3C0-909-605.lbl
Part No SW: 3C0 909 605 J HW: 3C0 909 605 J
Component: 04 AIRBAG VW8 029 2521
Revision: 09029000 Serial number: 003A2PQTFWS+
Coding: 0012340
Shop #: WSC 00028 028 00001

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 3C0-953-549-SW20.lbl
Part No SW: 3C0 953 549 A HW: 3C0 953 549 A
Component: Lenksäulenmodul 005 0010
Revision: 00005000 Serial number: 3C5953507C
Coding: 0000013
Shop #: WSC 00028 028 00001

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 3C0-920-xxx-17.lbl
Part No SW: 3C0 920 870 Q HW: 3C0 920 870 Q
Component: KOMBIINSTRUMENT VD1 4240
Revision: X0033000 Serial number: 00000000000000
Coding: 0007105
Shop #: WSC 00311 572 86198

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 3C0-907-530.lbl
Part No SW: 3C0 907 530 Q HW: 3C0 907 951
Component: J533 Gateway H13 0172
Revision: H13 Serial number: 3690P106150889
Coding: F9807F06400202001002
Shop #: WSC 00079 790 00000

4 Faults Found:
01305 - Databus for Infotainment
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 4
Mileage: 90406 km
Time Indication: 0

01300 - Control Module for Navigation with CD-Rom (J401)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 4
Mileage: 90406 km
Time Indication: 0

01304 - Radio
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 4
Mileage: 90406 km
Time Indication: 0

01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Reset counter: 4
Mileage: 90406 km
Time Indication: 0


-------------------------------------------------------------------------------
Address 25: Immobilizer Labels: 3C0-959-433-25.lbl
Part No SW: 3C0 959 433 K HW: 3C0 959 433 K
Component: IMMO 038 0367
Revision: 00038000 Serial number: VWZCZ000000000
Shop #: WSC 131071 1023 2097151

Part No: 3C0 905 861 D
Component: ELV 024 0370
3C0905861D ELV 024 0370

No fault code found.

-------------------------------------------------------------------------------
Address 37: Navigation
Cannot be reached

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels: 1K0-959-701-MIN2.lbl
Part No: 1K0 959 701 K
Component: Tuer-SG 024 2365
Coding: 0000181
Shop #: WSC 00028 028 00001

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x.lbl
Part No: 1K1 909 144 K
Component: EPS_ZFLS Kl.5 D06 1701
Shop #: WSC 00000 000 00000

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 3C0-959-433-46.clb
Part No SW: 3C0 959 433 K HW: 3C0 959 433 K
Component: KSG PQ46 ELV 038 0455
Revision: 00038000 Serial number: VWZCZ000000000
Coding: 01910A0801864E763804141570084F0E503C00
Shop #: WSC 00028 028 00001

Part No: 1K0 951 605 C
Component: LIN BACKUP HORN H03 1301

Component: NGS n.mounted

Component: IRUE n.mounted

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MIN2.lbl
Part No: 1K0 959 702 K
Component: Tuer-SG 024 2365
Coding: 0000180
Shop #: WSC 00028 028 00001

No fault code found.

-------------------------------------------------------------------------------
Address 53: Parking Brake Labels: 3C0-907-801-53.lbl
Part No SW: 3C0 907 801 B HW: 3C0 907 801 B
Component: EPB VC8HC001 013 0001
Revision: 013
Coding: 0000012
Shop #: WSC 131071 1023 2097151

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio
Cannot be reached

-------------------------------------------------------------------------------
Address 62: Door, Rear Left Labels: 1K0-959-703-GEN2.lbl
Part No: 1K0 959 703 F
Component: Tuer-SG 021 2432
Coding: 0000144
Shop #: WSC 00028 028 00001

No fault code found.

-------------------------------------------------------------------------------
Address 72: Door, Rear Right Labels: 1K0-959-704-GEN2.lbl
Part No: 1K0 959 704 F
Component: Tuer-SG 021 2432
Coding: 0000144
Shop #: WSC 00028 028 00001

No fault code found.

-------------------------------------------------------------------------------
Address 7D: Aux. Heat Labels: 1K0-963-235.lbl
Part No SW: 1K0 963 235 E HW: 1K0 963 235 E
Component: PTC-Element 0404
Revision: 00800000 Serial number:
Shop #: WSC 00000 000 00000

1 Fault Found:
01299 - Diagnostic Interface for Data Bus (J533)
005 - No or Incorrect Basic Setting / Adaptation

End ---------------------------------------------------------------------

[martin1810]

My mistake. Your original coding was correct. Do the original code again but make up some numbers for workshop code, Importer, Equipment. Something like 1234.....123....12345.
This is what ross-tech recommend.
Then try to open module 37 navigation. If it opens have a look at the coding.

[drizzt dourdem]

My mistake. Your original coding was correct. Do the original code again but make up some numbers for workshop code, Importer, Equipment. Soething like 1234.....123....12345.
This is what ross-tech recommend.
Then try to open module 37 navigation. If it opens have a look at the coding.

I tried changing the values for workshop code, Importer, Equipment and will not let me change them. How could I?

Thanks

[martin1810]

If it won't change then you can't change it. I am out of ideas. You could try recoding the gateway to F9807F16500302001002. This should not work but it is worth a try.

[drizzt dourdem]

If it won't change then you can't change it. I am out of ideas. You could try recoding the gateway to F9807F16500302001002. This should not work but it is worth a try.

that does not work, the end I will return the gateway to the ebay seller, thank you very much for everything

[drizzt dourdem]

The eBay seller told me this:

"You need to cut pin 2 inside the box. Like on the 530 L. Otherwise no.

This fault is from the RNS-510, I think it is bad coded. He needs to remove unit 37 and 56 from the Can gateway, remove key from car, and reinsert key in car. login into can gateway again remove errors, and add unit 37 & 56 again and test for errors.."

and I have seen this in another forum:

Hey.

The part number is : 3C0907530 and should end with either H, L or Q but remember if you intall the L or Q version you have to take the gateway apart end cut the 2. pin from the right otherwise the gateway will be toasted and you have to buy a new one.




The can gateway is placed just left of the gas pedal and a little up there is a 20 pin blue plug in it.

[martin1810]

I have never heard of cutting pins before. I would not do that as the gateway may end up as scrap.

[tcleong]

Hi Guys,

1. I am currently driving Passat Variant B6 2.0T 2007.

2. Please see pic of old & new CAN gateway.

http://img651.imageshack.us/img651/6...3644resize.jpg
Left: Original CAN gateway. Right: New CAN Gateway

3. My installer has already installed the RNS510 (LED version) and reverse camera installed.

4. The new CAN gateway has the ‘back-up cam’ (6C) option available. The old CAN gateway does not have this option. The other purpose of upgrading the CAN gateway is to prevent battery draining.

5. When we switch on the ignition & select reverse gear:
a) the ‘bulb blown’ indicator lights up
b) the reverse light on the rear does not light up. No voltages.
c) reverse cam doesn’t work. Nothing happened/showed up on the RNS 510 screen.
* We copied the old CAN gateway settings to the new CAN gateway settings. Only include “back-up cam” option on the new CAN gateway.

6. The faults which i mentioned in 5(a) & 5(b) will only go away after he swapped back to the old (original) gateway.

Questions:
a) Is this the correct new CAN gateway for the Passat Variant B6

b) One of the thread mentioned, one should cut ‘pin 2′. Can anyone elaborate more on why this should be done. Is this related to what i am encountering now?

c) The reverse camera module wirings are OK (with the original/old CAN gateway) because he tried connecting the output to a portable DVD player, put to reverse gear, and there is picture on the portable dvd player. This experiment was done while waiting for the new CAN gateway.

Please advise.

Thanks in advance.

[martin1810]

that does not work, the end I will return the gateway to the ebay seller, thank you very much for everything

Did you try at the start page. under settings and user interface. Change codes from 00000 etc to 12345 etc.
That should work. Then recode with you original 10 byte code.

[mango99]

Did you try at the start page. under settings and user interface. Change codes from 00000 etc to 12345 etc.
That should work. Then recode with you original 10 byte code.

I test all 530Q gateway that I have on a Passat 3C 2008,
this Passat come with 530E,now using 530L,all work well.

and I test all 530Q on this 2008 Passat today.

my VCDS 10.6.1 set code as 12345, importer as 123, equipment number as 12345

all 530Q have this error code.
can't communication with RNS510

at this moment, I think 530L is the best choice,
but it was dropped and replaced by 530Q in ETKA.