For some time now (over a year) I have had an intermittent warning fault light "Check Brake Pads". I checked the pads they appeared OK so I thought little more of it. In a recent MOT I got an advisory to replace the front discs. I have just done this and changed the front pads whilst I was at it. I checekd for obvious damage to the wireing loom on each side and found nothing untoward. I am assuming that with new pads there must be a break in the circuit somewher. Does anyone know of common faults with this system. Alternatively if there is a break point for the LH and RH wirong loom somewhere (apart from the pad connector), I could then short this out for diagnosis. Any help would be appreciated.