struggling with AMI part numbers

Quote:

---

Originally Posted by A6_Chris

Do you have VCDS?

If so, a few screendumps for the long coding helper for the 5F would help ;)

---

had a look but it's not much use......there's nothing in the long code helper relating to media input/interfaces.

Press the 'down arrow' on your keyboard and on that screen and it will move along the bytes ;)

I know, nothing there relating to media just other MMI menu stuff......

Ahh okay.

Are there many blank spaces? Ie tick boxes but with no text beside them?

From memory I don't recall seeing any without text. TBH I don't think VCDS has access to the subsystems within the 5F, unless someone knows how?

Edit... just googled some of the subsystem part numbers and they're just switch panels and map data so maybe we're looking in the wrong place for AMI and similar??

Quote:

---

Originally Posted by revver

PM sent

---

Thank you, not at that PC now ... will send info tomorrow :) ...

Quote:

---

Originally Posted by c4a5er

From memory I don't recall seeing any without text. TBH I don't think VCDS has access to the subsystems within the 5F, unless someone knows how?

Edit... just googled some of the subsystem part numbers and they're just switch panels and map data so maybe we're looking in the wrong place for AMI and similar??

---

From instructions (Link:- post 25)

Quote:

---

Originally Posted by a8 tech

now you need to access the hidden menu in address 5f

select address 5f

select adaption 10 channel 6 and set the value to 1 and save

---

Above step is to enable hidden menu in MMI 3G via VCDS ...

Quote:

---

Originally Posted by a8 tech

now reboot the mmi using the softkeys

when the mmi comes back on press and hold set up and car until the green menu comes on

scroll down find diagnosis and enter then select settings and then scroll down to ami set this to 7/8

come out of the green screen and reboot mmi

now test the ami

---

Now the bold text is the element to enable AMI via the green/service menu not VCDS ... from my own meddling in green/service menu of MMI 2G you can change coding/adaptations in other modules of car ...

Only way c4a5er you will know if its a coding change or adaption is to scan codings/adaptions with and without AMI enabled and compare, if there are no labels/helper balloons to tell us in VCDS ...

Quote:

---

Originally Posted by gupsterg

I don't have MMI 3G :( but Roy does & he has VCDS :) ...



So hardware Part no/rev in blue , software part no/rev in red ...

So Roy do you have AMI? regardless of answer does your module support the coding for AMI?

If you don't mind and have time can you check relevant module for coding/adaptations/drop down boxes/helper balloons, etc, etc ...

Roy has a 2009 vs revver's 2010 , if Roy's support it then revver's should in theory as it is newer and will have newer 5f/software...

TIA
G

---

I do have AMI.

If you don't mind and have time can you check relevant module for coding/adaptations/drop down boxes/helper balloons, etc, etc ...

How do I get to this information?

Quote:

---

Originally Posted by royclark

I do have AMI.

---

Great :) ...
Do not enable/disable AMI meddling owner friends :beerchug:...

Quote:

---

Originally Posted by a8 tech

IMPORTANT

Any software updates will wipe the function so you need to reapply the changes if your vehicle has any dealer updates

---

We will now look at 5F software/hardware part no/revs ...

Quote:

---

Originally Posted by gupsterg

I don't have MMI 3G :( but Roy does & he has VCDS :) ...



So hardware Part no/rev in blue , software part no/rev in red ...

So Roy do you have AMI? regardless of answer does your module support the coding for AMI?

If you don't mind and have time can you check relevant module for coding/adaptations/drop down boxes/helper balloons, etc, etc ...

Roy has a 2009 vs revver's 2010 , if Roy's support it then revver's should in theory as it is newer and will have newer 5f/software...

TIA
G

---

This is my 5f recording before I had a fault code.

Address 5F: Information Electr. (J794) Labels: 4E0-035-6xx-5F.clb
Part No SW: 4E0 035 652 A HW: 4E0 035 652
Component: B-BN-EU H47 0048
Revision: -------- Serial number: 349A-097506098
Coding: 010101010102C3ED01000305EF6300030001
Shop #: WSC 00779 210 97010
VCID: 1F47CC660EC4E5E0386
Subsystem 1 - Part No SW: 4L0 919 604 HW: 4L0 919 604
Component: DU6 Basic H43 0306
Subsystem 2 - Part No SW: 4F0 910 609 E HW: 4F2 919 611 H
Component: Bedienteil MM H01 0060
No fault code found.

Sound.

Address 47: Sound System (J525) Labels: Redir Fail!
Part No SW: 4F0 035 223 P HW: 4F0 035 223 P
Component: BOSE G3 C6 H01 0100
Revision: AG001300 Serial number: 00000000002161
Coding: 0F010000
Shop #: WSC 02391 823 56573
VCID: 2953D2BE40801B50562
No fault code found.

Thanks for that Roy :) ...

We now need revver's info once he has a scan ...

I'm being cautious with information as I do not wish anyone to have any issues from meddling ...

Quote:

---

Originally Posted by a8 tech

IMPORTANT

Any software updates will wipe the function so you need to reapply the changes if your vehicle has any dealer updates

---

I have misinterpreted this section of A8 Tech's instructions :Blush2: ...

What it means is that if you do the AMI MMI 3G retrofit DIY @ home when you go for a dealer software update which is MMI related it will be undone and you will need to recode it again ...

This occurs due to how when car is plugged into VAS and communication occurs between it and VAG server it will recode car to what it had out of factory, ie no AMI ...