Tried contact cleaner but no luck.
Printable View
Tried contact cleaner but no luck.
No luck with contact cleaner.:mad:
A used part available, part no 8K0953503BD but the problem is with headlight high beam actuation. My existing lever when pushed down (for high beam) it stays there and the this one when pushed down returns back to middle position. Will it work with my car?
Also I don't have cruise control but this one has cruise control lever too.
Any help appreciated.
What is the VIN?
Hi,
it's WAUZZZ8K5CA091060
No it won’t work, you need 8K0 953 502 AT 4PK but I can’t see it being the problem, that correct step is to use a diagnostic system to check the switch positions in the body control unit.
I have VCDS but not much familiar with it.
Please tell me how ' to use a diagnostic system to check the switch positions in the body control unit' .
Thanks
Register your VCDS interface with Ross Tech and get verified, we can go from there and you can get dedicated help on the Ross Tech forum. Post a full scan of your car using the save as a txt function and include the VIN.
I have a Chinese copy so not possible to register there.
Not possible to get help from me either...
Oh dear.:confused: