Cruise control fitting

Nice!! Thanks mate will have a look as soon as it arrives

Sent from my GT-I9505G using Tapatalk

The module came this week, just messaging people from the map to see if they can code it :) so excited about finally get CC back in the car!

u remind me of me just before i installed mine lol... was great getting it back.

How do I fit this stuff? Are there any guides?

Sent from my Nexus 7 using Tapatalk

i used this guide AudiEnthusiasts Steering Wheel Swap

Check you high beam still stays on when changed! There are two type of stalks, I had the wrong one initially fitted to mine

Sent from my GT-I9505 using Tapatalk

Turns out I have no right indicator or high beam, where do I go from here? Is there a way to find a different cruise control stalk? Or can I do the canabolism and fit the cruise section onto the donor stalks? This is what the guy suggested may be possible on the setup. Its a bit frustrating got loads of codes done, cruise worked well but the next hurdle will be getting the indicator back.

Sent from my Nexus 7 using Tapatalk

I'm looking at taking this part off and then putting on the original indicator unit? Audi A4 (8E) A6 (4F) - Retrofit Cruise Control & Trim | eBay as I know the cruise part works.

Sent from my Nexus 7 using Tapatalk

Quote:

---

Originally Posted by iamdarren

Turns out I have no right indicator or high beam, where do I go from here? Is there a way to find a different cruise control stalk? Or can I do the canabolism and fit the cruise section onto the donor stalks? This is what the guy suggested may be possible on the setup. Its a bit frustrating got loads of codes done, cruise worked well but the next hurdle will be getting the indicator back.

---

Hi all, been helping this chap out with the coding and final installation. Had to nip round his to pick up some stuff I left after me yesterday and checked the part number of both stalks this evening. His old one taken out is 8K0 953 502 BC and the one he put in was 8K0 953 502 BD.

On searching, it seems to be the right swap for the saloon 8K to get the normal cruise control function (not ACC). We were left puzzled by the lack of right indicator only and no high beam (both stalks spring return to neutral position for main beam).

So, anyone with ideas, considering the stalk pack was used when he bought it, could it be faulty? Cannot see any other reason unless I have missed something with coding but both ECM and Steering Wheel controllers accepted the coding successfully.

Thanks!

The part number of the stalk which I fitted to my 2008 Saloon is V8KO 953 502 BD. It fitted and Coded without difficulty, so I should suspect the used part.