Printable View
Hello !! Model is Eonon ga5153w, with Android system.Quote:
Originally Posted by RichardSEL
In VCDS show me this error:
Address 44: Steering Assist Labels: 1Kx-909-14x.lbl
Part No: 1K1 909 144 M
Component: EPS_ZFLS Kl.135 H08 1901
Shop #: WSC 00028 028 00001
VCID: 356A238A631B60B4
1 Fault Found
00003 - Control Module
007 - Short to Ground - MIL ON
Thank u
Android units need to have an uprated CANbus module suffix letter "F" or later
I don't know why your Steering Assist module is reporting this fault. Was the
steering wheel upgraded to a multi-function with buttons version also?
My steering wheel the original Passat 2008. So I actually installed this multimedia Eonon.
My gateaway is SW: 3C0 907 530 E HW: 3C0 907 951
Do you think that if I update my cangateaway with a newer one (letter L for example) I solve this problem?
Thank u for help me
Early "E" versions did produce faults with the latest head units
Later "E" versions did not produce faults
So I recommend "F" or later
I don't know why your Steering Assist module is reporting this fault
I have not seen a wrong CANbus module produce this fault on Steering Assist
You say your steering wheel is original.
Original with buttons or original without buttons?
My steering wheel has 8 buttons.
Now what worries me the most is that yesterday I took out the multimedia Eonon, and returned it with the original radio of the car. After I correct the error everything ok, but now in the morning before sending this message I went to do a test and to my surprise the error came back. Steering continues hard, indicating the red steering wheel on the dashboard even with the original radio installed.
Do you have any idea what might be causing this to happen?
Sorry to be asking you so many questions, but in the city where I live here in Brazil, there is practically no reliable manpower to handle this car,
Thank you very muchhttps://www.flatout.com.br/wp-conten...TO-VOLANTE.jpg
The previous photo was from the internet.In this msg I am posting current photos that I myself took from the car.I am also sending the photo of the decoding of the multimedia Eonon and the original radio of my car as well?
CanBus Decoder: Meet Google Drive – One place for all your files
Original Radio System: Meet Google Drive – One place for all your files
Steering wheel of my car:Meet Google Drive – One place for all your files
I cannot see your photos. I do not have your account
Post your Autoscan with the original radio installed -- we can then give some ideas of why your steering is giving error
Hi, I just got the autoscan today.Quote:
Originally Posted by RichardSEL
And I saw that I'm in trouble on the drums. It was completely discharged. I could not even start the car.
One remark, previously I checked the charge was reporting around 13 through the information of the multimedia.
The autoscan done today is already with the original radio installed.
This is a counterfeit version of VCDS.
I don't understand "I'm in trouble on the drums. It was completely discharged." Do you mean the battery?
If your battery is without charge then modules will report errors which are not correct errors but because of bad battery
Your Autoscan shows:
"02385 - Rain / Light Recognition Sensor Function Restricted due to
Under-Voltage
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 183
Mileage: 149435 km
Time Indication: 0
Date: 2017.03.20
Time: 11:51:00
Freeze Frame:
ON
Voltage: 9.55 V
ON
ON
OFF
OFF
OFF"
Also other supply faults such as "Terminal 30" and "B+" errors.
New battery needed. Then go into each module and clear the errors. IGN off. Exit car. Lock. Wait 10 mins to go into sleep mode. Re-enter car. IGN only on. New Autoscan
Beware using this version of VAG-com. Counterfeits can give errors too :zx11:
Yeah, I was referring to the car battery. Sorry, my mistake. My English is not very good.
I'm using a friend's VCDS, and did not know it was not original.
Anyway my battery was really in trouble. I took it to the store where I bought it and the person responsible put a full load on it.
Put the battery back in my car and this time with full charge, I turned on the car and the steering has already unlocked,
I ask you, if the battery of the vehicle is not fully charged can it generate this type of break in the car?
Another question, I've been reading in other forums and I've seen people commenting that there is a problem with can-gateaway that causes drain on the battery, do you know anything about it?
Thank you very much