What kind of hardware is needed to retrofit a reverse dip mirror on a pre facelift 07 C6?Quote:
Originally Posted by Chris
Sent from my iPhone using Tapatalk
Printable View
What kind of hardware is needed to retrofit a reverse dip mirror on a pre facelift 07 C6?Quote:
Originally Posted by Chris
Sent from my iPhone using Tapatalk
Hi, i would ask about amp coding. I didn’t find anything about my problem.
I want add aux to my mmi 2g basic (no bose system)
I enabled hidden menu, I activated aux in hidden menu, I connected aux cable to amp in trunk and then I tried to change amp coding to allow aux in.
My original coding is: 080001
I trying to change it to 080041 or 080051 (by this step
0000x?x: Microphone
1 = Microphone (Standard)
2 = Microphone (Voice Control)
4 = Microphone (Analog Input (AUX))
5 = Microphone (Voice Control and Analog Input (AUX))
and when i press “do it”, the error screen say “coding rejected, code out of range”
How can i solve this?
Thanks
what pins you used for aux as they are different? And your mmi mainunit and amp partnumber to have proper info!
I used pins 26, 24 and 29 in 10 pins connector on amp.
Address 47: Sound System (J525) Labels: Redir Fail!
Part No SW: 4F0 910 223 M HW: 4F0 035 223 N
Component: Amp.-ASK-RD H07 0270
Revision: S1400000
Coding: 080001
Shop #: WSC 02399 823 56573
VCID: 28BA34AF5BFC8B52ADAEED-807D
Aux in should be 4 pins not 3, and for ASK amp i guess coding cant be 5, its either 3 or 4, did you got option aux-in under media menu after you enabled function in hidden menu?
And if you checking your first post, example has 7 zeros, your coding is only 3 bytes long, so try changing 4th number from left!
This should be ask amp for c6,but never know:
Long code:
The long code comprises 3 bytes, and is composed as follows:
1. Byte Interior spec:
xx0000
01 Right-hand drive, cloth trim, diesel engine
02 Left-hand drive, leather trim, diesel engine
03 Right-hand drive, leather trim, diesel engine
04 Left-hand drive, cloth trim, petrol engine
05 Right-hand drive, cloth trim, petrol engine
06 Left-hand drive, leather trim, petrol engine
07 Right-hand drive, leather trim, petrol engine
08 Left-hand drive, cloth trim, diesel engine
2. Byte Microphon spec:
00xx00
00 No microphone
01 1 Microphone
02 - Invalid -
03 No microphone and analog input (AUX) activated
04 1 microphone and analog input (AUX) activated
3. Byte Variant:
0000xx
00 Saloon
01 Avant / Allroad
Yes i shoul be 4 pins bud aux cable have L+ R+ and ground. In my old bmw this worked fine but here should be 4. I can merge ground togerher.
Yes i got. When I press Media button, then top right choose source I see aux in screen with “aux-in is now active” or some like this but no sound.
I ´ll try this step in this afternoom and let you know.Quote:
Originally Posted by Gunnark100
Thank you
I coded amp by your instruction. It work. Thanks.
But still no sound from aux. I pinned every 4 pins and nothing happend.
Exist some pins scheme for ask amp? A found yust 32pin bose amp and it shoul be different.
preFL C6 and only aux/in is a nightmare, I will pm you a bit info later, but you might be out of luck here:(Quote:
Originally Posted by broadcom
Your amp official pinout should be this:
23 - Microphone for J507 (+)
25 - Analog input (+)
27 - Loop break diagnostic wire
28 - Microphone for J507 (-)
30 - Analog input (-)