Printable View
I bought a secondhand Westfalia towbar removed from a 02 Passat Estate and tried to fit it to my 04 passat estate at the weekend.
The problem was that the pre-drilled holes in the car to fit the towbar (4 off, 2 each side) are 10mm diameter, but the holes in the towbar are nearly 20mm diameter.
Am I missing some bushes that take up the difference in the diameters?
The passat changed in 2004/2005 have you got the newer model or the older model?Quote:
Originally Posted by creedxup
I ask because your bar will not fit if your vehicle is the new shape and it came off a 02 model.
Scott
P.F.Jones Support Team
No, I have the older model passat so it's the same car and should fit.
I've downloaded the fitting instructions from Westfalia but it just shows 10mm bolts, but the holes in my towbar are approx 19mm.
Is it a westfalia detachable towbar?
if so there are two bars available
321505 - This one not being the 4 motion Passat
321508 - This IS the 4 motion model.
if the person who you purchased your bar off had the 4 motion model and you don't it will not fit and vice versa.
Scott
P.F.Jones Support Team
That applies to the fixed swan neck westfalia bar too.
Many thanks for your replies ScottQuote:
Originally Posted by PFJones
The one I have is the westfalia detachable
321504
What does this one fit?
Hi Creedxup,
Sorry for the delayed reply.
321504 - I have never heard of this part number before, I suspect it is an OEM part number. Dealers and aftermarket retailers get different part numbers...I have spoken with westfalia UK and they can't specify which on it is for I could Contact Germany for you but it might be easier for you you to contact a VW dealership local to you and ask them.
Alternatively PFJones will be able to supply you with a OEM bar for your passat with free single electrics. You can go to Volkswagon passat detachable Towbars.
Many thanks for your replies, I've downloaded the fitting instructions for my car and it looks like the Westphalia order number is
321 505
but the model number is
321 504
http://www.westfalia-automotive.de/f...%20war-101.pdf
So I have the right towbar for my car but surely if the holes in the towbar are twice as big as the holes in the car it's never going to be secure??
Very strange. I don't know what else I can tell you.Quote:
Originally Posted by creedxup
Sorry
Scott
P.F.Jones Support team
Many thanks to all who helped, I fitted the towbar yesterday, it would appear that when you torque the bolts they crimp the chassis into the bosses welded onto the bar,
I's all nice and secure so all good.