rear washer jet

anyone ever replaced the rear washer jet on a mk5 golf.
is this a diy job or do i book it in to main dealer.
:beerchug:

Why ? are you not getting water through it..
The pipe inside is known to pop off, you'll have to remove the boot trim to get at it..

Correct, getting no water, had new washer pump fitted, replaced 2 front jets and still no water at the rear.
Can you tell me how to get the trim off?

i had a similar problem with mine not too long ago. the top cap covering the actual nozzle just pops off, and so does the nozzle. i cleaned mine out with a pin etc and hey presto it worked again. perhaps try that first?

i have done this no joy
thanks any way

take it u can hear the pump working.
haynes manual describes how to take the panel off.
silly question but have u tried squirting the jet without the nozzle on?

pump is working.
i am going to check if pipe has come off,if not then i will try it without nozzle on.
thanks

sorted this problem.
removed tailgate trim, checked washer pipe , it was ok, tested with pipe off, water coming out, tried to clean jet, no joy.
so replaced with new one everything working fine.