Without leaving screwdriver marks everywhere? It is in the centre section near the handbrake
Many thanks
Tony
Printable View
Without leaving screwdriver marks everywhere? It is in the centre section near the handbrake
Many thanks
Tony
Make Model and Year. Regards Peter
Hi - it is an A6 2.4SE 1999 AVANT
Many thanks
Tony
Mine is loose and lifts up every time I catch my sleeve on it. I think it should just be held in with a spring clip at the front and rear of it, so it should come out by pulling it upwards. Or use a soft plastic lever to help it up.
The quick was is to use a lenght of good gaffa tape and cut a hole in it the size of the knob, place it over the switch panel and smooth it down well then pull the switch out with a fore and aft motion. The bokk method requires the removal of the gear stick gater and push the switch ou from underneath. If you eamil at Info at 3DAssociates dot co dot uk ( anti phishing ) I'll sen you the drawing and instructions. Regards Peter