Camber settings

#1 Yeti.
I just discovered my front tyres, after a good mileage, badly cut out on the inner edges of each. They are 225/40x19, but that equates to exactly the original size. Both tyres worn the same. Car drives brilliantly.
This begs the question of whether the factory camber spec is a touch too aggressive? How much, if any adjustment can I do. Anyone else out there played around with camber setup?https://uploads.tapatalk-cdn.com/201...7bdfd64d0b.jpg


Sent from my iPhone using Tapatalk

What makes you think it's the camber that's caused this? I dont think there is any camber adjustment on the yeti, it looks more like excessive toe out. Get the ball joints track rod ends and rack inners checked and a 4 wheel alignment check. How many miles and any steering or suspension parts been changed?

Incorrect toe destroys tyres not camber.
But if the tyres have done plenty of miles and are at the end of their life it could be completely normal wear.