Removing front door cards? HELP

Hi all,

First time Audi owner and first post here so forgive me if this has already been asked / answered.

Bought an A6 SE Ultra a week ago, 2014 in white. Loving the car so decided to upgrade all interior bulbs to LEDs. Did the maps lights x 4,dome light,gloove box, boot etc and then removed the puddle lights (only on front doors in this spec). Now I cannot get sufficient slack on the wiring within the door to allow me plug the light fittings back in !!!!!!!!

The only solution I see isto remove the doorcards and either generate the necessary slack or plug the light back in with the cards off. I can find plenty of demos on youtubeto remove cards on C6 but haven't been able to find anything C7 related. Any body do this and can you instruct / post pics please?

Do I need torx screwdrivers as I currently don't own any but see them mentioned quite a bit in relation to Audis.

Cheers in advance

You first need to remove the 3 torx screws. You can pull of the door trim easily but be careful not to crack it

http://uploads.tapatalk-cdn.com/2016...8204b1d59e.jpg

After that you first need to release a clip who's behind the panel (see picture). Afther that you can pull around the panel to take it off.
Hope this helps you.

http://uploads.tapatalk-cdn.com/2016...f5efb6eb68.jpg

Thank you kind sir for the prompt reply.............. that's a job fortomorrow

Now any idea how to fix a dodgy spacebar :mad:

Actually Los Cuentos could I trouble you for the same information on the rear doorcards.......... the dampening mechanism on the ashtray in the rear door handle needs attention, something slightly askew