312 mm brakes

Hi guys I've got a 312mm brake set up from a mk5 golf with 312mm a4 discs,will this fit onto my car as I've been told some of the 280mm setups have a different knuckle car is an 04 pd100 avb
thanks

Nobody upgrade from 280mm brakes? Just wanting to know if either 288/312mm carriers will fit the knuckles?

Either no one knows or they're not answering, only way to find out is to try it, I do know you'll need to have 16 inch wheels.

Thanks for your reply calum,I've had the caliper/carrier bolted on with no issues to test it,I've now got new 312mm discs,ferrodo premier pads and suitable flexis so I'm ready to tackle the job,if I can work out how to post pictures I'll put some up as other people may be interested in same upgrade.

Just the caliper bolted up to test fit
http://i1053.photobucket.com/albums/...sst3cixxc.jpeg

just about to bring my s4 in to do the same, test fit the new brakes, but i am going from 321mm discs to 350mm with brembo 6 pots off a porsche cayenne.

Sounds interesting mate,after remapping my car the brakes are really weak,so hopefully the 312 set up will make a noticeable improvement,you gonna post pics mate?

yeah, will get some pics up soon.. the standard s4 brakes work well enough upto a point, but start to fade on fast a roads. shes remapped anyway but i am going for bigger turbos soon so the brakes are in preperation for that. total cost will not be much more than expensive standard brakes, but i did draw the line at the ferodo ds2500 pads which even trade would set me back 300 quid, so went for the trw dtec instead.

Had a look at the ferrodo ds pads a wee bit pricey for me,went for the ferrodo premiers as they get good reviews,my cars a pd100 remapped to 140 at the moment but I'm after a pd130 turbo and injectors and 3bar map sensor then hopefully push it up to 175ish.

looking to fit a pair of tte550 turbos and fuel pump/injectors and get to 550 bhp.