Printable View
Hi guys, long time from ive been on here but looking a bit of help, had my car serviced today along with new rear pads, now the car is flashing P and park brake on the dash, handbrake button is also flashing and a constant beep when driving. Guy who serviced it isnt sure what the problem is but says its ok to drive but im not sure. He's looking me to take it to another guy he knows next week but I need this fixed asap
What did he use to release the EPB?
If he used VCDS then do the adaptation this should sort it out.
Look at this Electro-Mechanical Parking Brake (EPB), rear brake pad service - YouTube
Im not sure, he's calling to mine later to see what he can do. Ill show him thatQuote:
Originally Posted by dan2485
Ill post the codes when I get them later and see if anyone can help. From what he said earlier the fault was coming up motor malfunction. Driver side is working passenger side isnt. Could there be a fuse or something blown?
Were they retracted properly?
Im sure if I asked him that he would say yes
Just check that the wiring to the calipers has not been stretched and damged.
Earier models had short looms.
02432
02432 - Ross-Tech WikiQuote:
Originally Posted by skinso
Possible Symptoms
Parking Brake Warning Light active/flashing
Possible Causes
Wiring/Connectors from/to Left Parking Brake Motor (V282) faulty
Left Parking Brake Motor (V282) Power Supply faulty
Left Parking Brake Motor/Caliper (V282) faulty
Possible Solutions
Check Wiring/Connectors from/to Left Parking Brake Motor (V282)
Check Left Parking Brake Motor and (V282) Power Supply
Perform Terminal 30 Reset
Remove Fuse(s) for a short Time.
Where would the fuses be?