Hi Guys I just changed from an Audi A8 to a new RS6 and I have changed the wheels for the winter. Now the wheels have been changed I am getting an error message about the TPMS stating it is not Active.
Is there a way I can switch this off?
Printable View
Hi Guys I just changed from an Audi A8 to a new RS6 and I have changed the wheels for the winter. Now the wheels have been changed I am getting an error message about the TPMS stating it is not Active.
Is there a way I can switch this off?
yes theres is, do you have vag com/vcds
Yes I have a vag com
go to address 17
Coding
* ????xxx: Options
o +0001 = Quattro (Standard)
o +0002 = w/o Driver Information System (DIS)
o +0004 = Vehicle with Clutch (NO Automatic)
o +0008 = Second Tire Size Pair
o +0016 = Tire Pressure Monitoring
o +0032 = Adaptive Air Suspension
o +0064 = Advanced Frontlighting System (AFS)
o +0128 = Adaptive Cruse Control (ACC)
o +0256 = 70-Liter Fuel Tank (only Front-Wheel-Drive)
o +2048 = Switch Option for Bord Computer Levels (MY 2006+)
subtract 16 from 4th digit from the right
go to address 07
Channel 001: Installation List I (MMI Functionality)
* +00001 = Adaptive Cruise Control installed (PR-8T4)
* +00002 = Ambient Lighting installed (PR-QQ1)
* +00004 = Acoustic Parking System Front installed (PR-7X2)
* +00008 = Acoustic Parking System Rear installed (PR-7X1/7X2)
* +00016 = Tire Pressure Monitoring System installed (PR-7K3/7K4/7K5)
* +00032 = Sunroof installed (PR-3FE/3FR)
* +00064 = Adaptive Air Suspension installed (PR-1BK)
* +00256 = Rain Sensor installed (PR-8N3)
* +01024 = Seat Adjustment Front installed (PR-3PN)
* +02048 = Seat Adjustment Rear installed (PR-5Z1)
* +04096 = Multi-Function Steering Wheel installed (PR-1XW)
* +08192 = Lane Change Assistant installed
* +16384 = Lane Holding Assistant installed
* +32768 = Back-Up Camera installed
subtract 16 from adaption channel 01 and then go to adaption channel 111 and set to 1 to rest
If the light still comes on go to address 19 and un check tpms from the installation list
If its still on let me know, going out shopping
Before you make any changes record all the coding and channels you will be adjusting for reference
Because you have the pressure sensor type system you may need to unplug the control unit so there no can signal, but lets see what happens first
Thanks I will get to this after the festive period :beerchug: