hi all, can anyone tell me if this steering module supports cruise control please, have tried the looking up on internet can not find anythin with the letter T at the end of part number.
cheers guys....
Printable View
hi all, can anyone tell me if this steering module supports cruise control please, have tried the looking up on internet can not find anythin with the letter T at the end of part number.
cheers guys....
Edit again, I do have something for you this time. Based on several scans, it looks like that's a common Audi RS4 4.2L module. Several vehicles have the engine module coding for CCS enabled.
I do wonder why it's only found in the RS4 and not any other models, or in this list: http://wiki.ross-tech.com/wiki/index...tting_%288E%29
hi, thanks for that, i have found out that it will link up with my b6 19tdi an the cruise will work just fine but the dis will not work off the stalk as the dis works off the rs4 steering wheel, (so i'v been told) if this is incorrect please let me know..so will need the wheel aswell as the module i think?..Quote:
Originally Posted by Dana@Ross-Tech
also when i start my car up from cold the cooling fan comes on an when it gets to temp it goes off, run a check its come up with a code 17664-p1256. checked the rosstech codes but my symptom is not on the problematic list. car runs fine just fan comes on in morning? any ideas..
thanks for getting back to me, big help...:biglaugh:
17664 P1256 Engine Coolant Temp Sensor (G62), Open or Short to Plus
If this module is installed, please post the complete Auto-Scan.Quote:
Originally Posted by lee a4
You are right, that control module is for RS4 and it will expect the dis buttons on the steering wheel. you will need a Q or R control module for dis to work on the wiper stalk.