Notices
 
 

  

  • VW Audi Forum - The # 1 Volkswagen (VW) Group Forum

    VW Audi Forum - The #1 Volkswagen (VW) Forum Dedicated to the whole Volkswagen (VW) Group

    VW Audi Forum - The #1 Volkswagen (VW) Forum Dedicated to the whole Volkswagen (VW) Group of vehicles including Volkswagen (VW), Audi, Seat, Skoda, Bentley, Bugatti, Lamborghini, Porsche Motor vehicles, Scania and MAN Truck & Bus and Ducati Motorcycles.

    Topics covered include Volkswagen (VW) Group news & reviews, owners gallery, advice and general information on everything related to the Volkswagen group of vehicles

    Including owners and enthusiats of Volkswagen (VW), Audi, Seat, Skoda, Bentley, Lamborghini, Porsche Motor vehicles, Scania and MAN Truck & Bus and Ducati Motorcycles.

     
  • Mulliner develops 22” carbon fibre wheel for Bentayga




    • 22” Mulliner carbon wheel will be the largest carbon wheel in production
    • Weight saving of 6 kg per wheel, unsprung mass, compared to aluminium
    • Developed in conjunction with leading composite manufacturer, Bucci Composites
    • Five years of engineering delivers first carbon wheel to pass TÜV testing
    • Innovative processes ensure repeatable high quality components utilising RTM (Resin Transfer Moulding) technology
    • Increased impact safety due to material weave dispersing air loss
    • Improved stiffness equivalent to 1° in camber per 1G of force
    • Reduced tyre wear due to stiffness of wheel
    • Available to order through Mulliner later this year

    After years of development with one of the world’s leading composite suppliers, Bentley is today announcing a new carbon fibre wheel developed specifically for the Bentayga. The 22” carbon wheel, engineered with renowned specialists Bucci Composites, is to be the largest carbon wheel in production in the world and offers a vast range of benefits beyond the initial 6 kg improvement in unsprung mass per wheel.

    The new carbon wheel has been subjected to the exceptionally rigorous TÜV (Technischer Überwachungsverei - Technical Inspection Association) standards, and is the first carbon wheel ever produced to pass all tests. The newly developed rim has undergone the most rigorous testing for non-metallic wheels according to the new TÜV standards including biaxial stress testing, radial and lateral impact testing for simulating potholes and cobblestones, tyre overpressure, and excessive torque tests exceeding the permitted limits.

    One of the most severe tests of the TUV requirements – the impact test - has shown how the carbon rim is extremely safe in addition to the performance benefits. After a severe impact which would crack or shatter an aluminium wheel, causing the tyre to collapse explosively, the carbon fibre rim allows a slow tyre deflation thanks to the intelligent layering of fibre weaves, allowing the vehicle to come to a controlled, safe stop.

    For the final sign off stage, the wheel was put through its paces on one of the most famous tracks in the world - the Nürburgring Nordschleife.

    The Technological Benefits of Composite Wheels

    Carbon fibre not only provides a significant weight saving, but also offers the additional benefits of increased strength and stiffness. This leads to a number of fundamental benefits:

    • Increased safety – when the rim receives a high impact, the weave pulls apart leaving openings to allow gradual air loss rather than instant deflation like an aluminium rim.
    • Increased steering agility – the 6 kg weight saving and the high stiffness afforded by the properties of carbon fibre mean a more stable and consistent steering platform. In comparison, a forged aluminium rim can lose up to a degree of camber due to wheel flex, reducing grip and agility.
    • Improved and more responsive braking thanks to the decrease in unsprung mass.
    • Reduced tyre wear - Since the stiffer carbon rim does not suffer from the same amount of bending, it allows for greater tyre stability and a more consistent contact patch thanks to a larger tyre support surface.


    Innovative Production Processes

    One of the main innovations lies in the rim manufacturing process, which involves the application of innovative concepts (covered by patents) combined with the use of high pressure RTM (Resin Transfer Moulding). The materials and production parameters have been carefully studied to ensure the repeatability of the product without affecting its quality.

    The process involves the cutting of carbon fibre cloth into prescribed shapes. The weave segments are then stacked, heated and draped into a mould to create three-dimensional preforms. The preforms are collated and arranged into a larger mould before resin and hardner is injected throughout. After curing time at temperature, the component assembly is removed from the mould, and the final surfaces are machined to the correct finish, before polishing.

    New Mulliner Products for the Future

    This collaboration with a world leading composites supplier underlines Mulliner’s key principle in offering Bentley’s customers new and unique features. The new 22” carbon wheel is the perfect complement to Bentley’s existing carbon fibre products, including the highly sought-after Styling Specification which adds a carbon front splitter, sill extensions and rear diffuser to the Bentayga, and the opton of high gloss carbon fibre veneer to the interior.

    The new wheel will be available to order late 2021.
    This article was originally published in forum thread: Mulliner develops 22” carbon fibre wheel for Bentayga started by stuart View original post
  • VW Audi Forum Insurance


    If you need new insurance or your renewal is due, and you are looking for a good deal then please try the
    VW Audi Forum Insurance Scheme with Chris Knott Insurance

     
  • Recent Forum Posts

    bops6

    Re: Engine issue

    [emoji91]
    I'd never heard of this issue but after research its incredibly come. Why on earth are there so many cases of vag injector seals failed?

    bops6 Yesterday, 11:18 PM Go to last post
    dan2485

    Re: a6 saloon rear pillar trim removal

    From memory you have to do the following:
    1. Remove the D pillar trim - this clips out but has 2 screws at the top.
    2. Remove the rear seat

    dan2485 Yesterday, 08:59 PM Go to last post
    Crasher

    Re: Engine issue

    It is somewhat confusing why Audi decided to make the port that shows injector seals leaking discharge over the exhaust manifolds.

    Crasher Yesterday, 08:12 PM Go to last post
    bops6

    Re: Engine issue

    Phew, lucky this didn't happen a fortnight ago. Spent 8 hours in the car coz off traffic

    Sent from my ELE-L09 using Tapatalk

    bops6 Yesterday, 07:11 PM Go to last post
    Crasher

    Re: Engine issue

    It should not get hot enough to ignite.

    Crasher Yesterday, 07:10 PM Go to last post
    Crasher

    Re: 1.9 PD Radiator fan running constantly

    No you missed it, VISCOUS as in viscous fan coupling, with the engine OFF, can you freely spin the fan? The unit is completely self contained and its

    Crasher Yesterday, 07:08 PM Go to last post
    bops6

    Re: Engine issue

    Thanks
    Will it be OK for a couple of days of school runs, only 5 minutes each way? Worried it may cause other damage

    Sent from my ELE-L09

    bops6 Yesterday, 07:07 PM Go to last post
    Crasher

    Re: Which Warranty Company For Older Golf?

    In my experience, warranties are not worth the paper they are printed on.

    Crasher Yesterday, 07:04 PM Go to last post
    Crasher

    Re: Engine issue

    Injector seal leakage

    Crasher Yesterday, 07:03 PM Go to last post
    Crasher

    Re: A/C pressure / Temperature sensor G395

    Both common faults

    Crasher Yesterday, 06:37 PM Go to last post
    Not_Anumber

    Maps update

    I realised recently I needed to update my A7's satnav maps having several times been unable to find addresses in recently built roads. After some checking

    Not_Anumber Yesterday, 05:28 PM Go to last post
    WAWA6

    A/C pressure / Temperature sensor G395

    HI All

    Can anyone please tell if I need to replace the motor and censor G395 or is this a voltage issue as I have replaced the battery last

    WAWA6 Yesterday, 05:03 PM Go to last post
    willdudeuk

    Re: Air Con Leak - Low Pressure Side

    Can see the high pressure schrader valve appears to bubble when the ac is in use.... so guessing there is a leak there but I

    did replace

    willdudeuk Yesterday, 05:00 PM Go to last post
    oddshoes

    Re: Touran 2008 Towbar Electrics wire colours

    I am in the situation currently did anyone find a permanent live or did you go direct to battery?

    many thanks

    oddshoes Yesterday, 04:59 PM Go to last post
    Mr Zap

    Re: C6 estate auto box woes

    I've just done some more investigations and here's what I've found:
    1. The vehicle still won't select a gear, but since I cleared the fault codes

    Mr Zap Yesterday, 04:17 PM Go to last post
     
  • Google Ads - One

     
  • Google Ads - Two

     
  • Google Ads - Three

     


 



  


Disclaimer: VW Audi Forum is an "independant enthusiast website", administered in line with guidelines supplied by VAG in the UK, and is in no way related to any of the Worldwide Volkswagen,Audi,Seat,Skoda,Bentley,Bugatti,Porsche or Lamborghini group of Companies. For official up to date information on any of there vehicles, please visit the official websites. Any comments made throughout this website, are the views of the respective poster, and in no way represent the views of the VW Audi Forum Administration, or the worldwide Volkswagen & Audi Group of companies.


VW Audi Forum do not vet and are not responsible for any information which is posted in this forum. All content is viewed and used by you at your own risk and we do not warrant the accuracy or reliability of any of the information.


Copyright: Certain "words", "phrases" and "Images" used on this website by the Administration are "Copyright" of Volkswagen GB, Volkswagen AG (Germany), Audi GB, Audi AG (Germany), Volkswagen Motorsport GB, Volkswagen Motorsport AG (Germany), Audi Motorsport AG (Germany), Volkswagen Racing GB, Bentley, Bugatti, Porsche and Lamborghini. No image can be replicated by anyone WITHOUT the relevant Companies written permission.


All trademarks and copyrights remain property of their respective owners.

No part of the VW Audi Forum website or forum may be reproduced without written permission from the site administration


PLEASE NOTE - PERSONAL ABUSE, ABUSE AGAINST THIS OR ANY OTHER WEBSITE OR ANY COMPANY WILL NOT BE TOLERATED. OFFENDERS WILL BE MODERATED OR EVEN BANNED.


This website and forum are best viewed at a minimum resolution of 1024 by 768.



  



- VW AUDI Forum - The #1 Volkswagen (VW) Group Forum - Volkswagen (VW) - Audi - Seat - Skoda - Bentley - Bugatti - Lamborghini - Porsche - Scania - MAN - Ducatti - VW Audi Forum -


- www.vwaudiforum.co.uk - www.vwaudiforum.co.uk -