help with ESP/ABS coce

[5up3rman]

done and scan and have got this fault code.

Address 03: ABS Brakes Labels: 8E0-614-517.LBL
Controller: 8E0 614 517
Component: ABS/ESP front D620
Coding: 04275
Shop #: WSC 06435
1 Fault Found:
18265 - Load Signal: Error Message from ECU
P1857 - 35-10 - - - Intermittent

looked on ross tech site and can't find any onformation relating the what the fault code be and how to remedy.

Help please

[kenney]

Check the engine control unit for fault code(s)

[5up3rman]

i get an engine code fault which is:

Address 01: Engine Labels: Redir Fail!
Controller: 8E0 906 018 B
Component: 1.8L R4/5VT 0003
Coding: 11501
Shop #: WSC 63351
WAUZZZ8EZ1A026629 AUZ6Z0A0011963
1Fault Found:
16486 - Mass Air Flow Sensor (G70): Signal too Low
P0102 - 35-10 - - - Intermittent
Readiness: 000 1000

i have been trawling the net, some people actual say that these two faults may be interlinked.one guy at a garage seeign the codes has said it will need a new MAF.
however i'm gonna check fuses first, then try giving it a clean.
i also read one person that had a very similair problem, said he found he had a split vacum hose. he replaced that and MAF and it solved his problem.

anyone else thoughts would be greatly appreciated.

[kenney]

Repair the fault what ever it is and delate the code, and then generate the readiness code,