wet ccm

[sarah14]

ive got a o4 tdi with wet carpets. ive dried the carpets dried the ccm (some corrosion on pins) checked all the joints in the wiring after cutting open the loom they all looked spotless inside the clear tubes that join them. ive checked all fuses 3 times. i still cant get any windows to work any central locking to work and no inside light can any one please help im at my wits end i cant get the window up so i need to keep it in the garage:zx11:

[Crasher]

You need a fault code read of the system. Have you tried closing the windows using the key in the drivers door lock and holding it on lock for a few seconds?

[sarah14]

thanks crasher for the prompt reply.i havent tried the key in the lock but i code read it and i cant comunicate with the ccm at all im totaly at a loss

[Crasher]

Double check fuse 11 on the relay carrier or check that the red/black to the 15 pin connector at the CCM has 12V permanent live

[sarah14]

will do crasher thanks again for the help

[sarah14]

hi crasher, sorry to be a pest with this wet ccm . i checked the windows with the key in the fully locked position and the locks worked fine but no windows.i checked terminal 15 in both plugs at the ccm no power at all and position 11 on the fuse board has no fuse or terminals for a fuse on this passat,is there any way to get the window up or does it need a power supply from the ccm,is there and way to check the ccm or is it just a replacenent job. any help at all would be very much appreciatedl

[Crasher]

PM me the cars reg so I can double check the fuse assignment.