What is the correct offset for A4 Quattro alloys please?

[toff]

Hi,

Just a quickie... what is the correct width & offset for the "Quattro" alloy that comes on the B6 A4 please?

Does this sound right: 7.5J x 17 H2 ET45

Cheers
Al

http://www.tyresmoke.net/attachments/303928-AudiA4quattro.jpg

[Pete@ECSTuning]

ET35 on the B6 chasis and ET45 on the B5

[toff]

Thanks Chris..

So is ET35 the correct offset for all wheels that go on the B6.. or just those "Quattro" wheels in particular? Excuse my ignorance!

Cheers
Al.

[Pete@ECSTuning]

Bah look below

[Turbokiisseli]

Actually, the standard B6 wheel sizes are

7 x 16 ET42
7,5 x 17 ET45

Can't remember the 15s and 18s off the top of my head.

ET35 is a "universal" offset that most non-OEM wheels come in and they all fit. I have yet to see an Audi OEM wheel for the B6/B7 that had ET35.

[Pete@ECSTuning]

Actually, the standard B6 wheel sizes are

7 x 16 ET42
7,5 x 17 ET45

Can't remember the 15s and 18s off the top of my head.

ET35 is a "universal" offset that most non-OEM wheels come in and they all fit. I have yet to see an Audi OEM wheel for the B6/B7 that had ET35.

Bah, I blew through this one. I didn't recognize that he meant that wheel specifically as opposed to what offset was needed for a replacement wheel. Nice stop Turbokiisseli

[toff]

Actually, the standard B6 wheel sizes are

7 x 16 ET42
7,5 x 17 ET45

Can't remember the 15s and 18s off the top of my head.

ET35 is a "universal" offset that most non-OEM wheels come in and they all fit. I have yet to see an Audi OEM wheel for the B6/B7 that had ET35.

Thanks Turbokiisseli & thanks all the same Chris.. I should have specified that the Quattro wheel is 17"

:beerchug:

Al.

[Lefteris]

Hi guys, new to the forum and looking for the standard Wheel specification (PCD,ET,alloy Rim size and tyre size) for the A4 1.8T B6 capriolette.

If anyone can help with a link or something else, it would be great!

Thanks in advace!;)