5f electronics information elect error code help

[aristidis]

hello i have the folowing error codes.Any help will be welcome.It appeared after i retrofited a hybrid tv on my all road a4 2010 with MMI3G
Address 5F: Information Electr. Labels: Redir Fail!
Control Module Part Number: 8T1 035 666 A HW: 8T1 035 666
Component and/or Version: H-BN-EU H64 0032
Software Coding: 010100050006ADFF15011F1E00400003
Work Shop Code: WSC 06335 000 00000
2 Faults Found:

03276 - Please Check Software Version Management
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 140
Mileage: 23438 km
Time Indication: 0
Date: 2009.11.29
Time: 20:43:03

Freeze Frame:
Voltage: 12.90 V

01043 - Control Module; Incorrect Software Version
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 5
Fault Frequency: 1
Reset counter: 157
Mileage: 23586 km
Time Indication: 0
Date: 2009.12.09
Time: 14:56:43

Freeze Frame:
Bin. Bits: 00000000 00000000
Bin. Bits: 00000000 00000000
Bin. Bits: 00000000 00000000
Bin. Bits: 00000000 00000000
Bin. Bits: 00000000 00010000

Audi tried to recode the 5F inform,electronics with new code but it will refused to take it ,as well as upgrade the software version on this module.

Any ideas ?

[a8 tech]

Remove the retro fit and re run the update correctly so the fault code clears.When you update 5f YOU MUST SEND THE SVM WHEN PROMPTED NOT AT THE END.When the original 5f code is suggested it must be allowed to return the factory coding.
The server will always return the original code for the vehicle so you must manually code the 5f for tv to allow it

These fault codes indicate the sw update incorrectly carried out but also the vas will erase the codes after the svm if correct.All 5f updates return this fault if the svm process is incomplete

[aristidis]

thank you so much will try and let you know
ARI