PDA

View Full Version : erratic indicators & hazards - is haz switch the culprit ?



trevMk2
14-11-2009, 10:08 PM
Hi
Indicators on 2001 TDi130 are erratic - sometimes work ok - sometimes will blink once or twice then stop - sometime wont work at all. Pressing hazard switch has same erratic results. Passenger footwell dry. Indicators blink as normal when locking or un-locking. Suspect relay problem.
Some other posts suggest that the relay is part of the haz switch and that haz switch may be the culprit.
- do my symptoms point to this ? can somebody confirm that relay is part of haz switch?

Thanks

Trevor

hotdog73
14-11-2009, 11:26 PM
Hi Trev,
Had the same problem with mine last year was indeed the hazzard light switch.Got one from euro car parts for about £1o i think.Hope this has helped.

Neil

trevMk2
21-11-2009, 10:18 PM
Yep - it was the hazard switch. I got mine from GSF about £14, however faceplate about 2-3 mm wider than original fit and therefore jammed "on" in recess!! Fortunately able to swap faceplate with original.

Trevor