rob160
07-05-2009, 11:09 PM
If just fitted a new clutch,flywheel and thrust bearing on my 2002 1.9. Tdi 130 and on completion I started it up and the clutch pedle was solid and would not depress then with a bit of force but not over the top I heard a braking would and the pedle whent to the floor. On inspection the slave is broker and leaking.
I have tried putting a screwdriver in the hole and move the arm that the slave moves but it won't budge.
Is this just the slave giving up or is the arm jammed causing it to brake.
I have tried putting a screwdriver in the hole and move the arm that the slave moves but it won't budge.
Is this just the slave giving up or is the arm jammed causing it to brake.