View Full Version : Anti roll bar mod on Cabrio
wmccann
27-03-2009, 02:07 AM
Hi Guys,
Has anyone done the RS4 Antiroll bar replamcement mod to a B6 Cabriolet? if so did it make a big difference considering the chasis is different from the saloon/avant (or so I believe)
thanks,
Walter.
randall977
27-03-2009, 08:47 AM
I found this link...
http://www.tyresmoke.net/forum/audi-a4-s4-cabrio/56829-22-mil-rs4-drc-rear-anti-roll-bar-fitted-wow-d.html
bez101
27-03-2009, 07:16 PM
Hi Guys,
Has anyone done the RS4 Antiroll bar replamcement mod to a B6 Cabriolet? if so did it make a big difference considering the chasis is different from the saloon/avant (or so I believe)
thanks,
Walter.
done and no change at all
wmccann
25-04-2009, 10:32 AM
Hi All,
Okay, had ordered the ARB before reading Bez's message and could not cancel it.
Anyway putting it on was a pain in the ****!!!! but got it on after 3 hours.
Any difference: under normal driving no - note the A4 Cabriolet seems to have an 18mm ARB to start and it also has 2 metal bars in a V shape on the back to stiffen the ride.
Under heavy driving, especially when you throw the car into a corner (or roundabouts) it is amazing the difference. the rear almost flicks into position. definetly a much better drive. but I don't drive like that much (kills fuel consumption).
So overall is it worth it, probably not unless you like driving hard.
Walter.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.