View Full Version : Wiring in Sat Nav A4 2008 (old model)
rayatt
11-11-2008, 10:17 PM
I would like to permanently feed my Tom Tom sat nav from an under the dashboard power supply.
Can anyone suggest the best way of achieving this?
Lord Buckingham
12-11-2008, 09:10 AM
Quite easy to do, would suggest a trip to www.dsldevelopments.com (http://www.dsldevelopments.com) to buy a vent mount bracket and and associated holder for your TOMTOM device. Make sure you get the one thats supplied with the cable and power converter as TOMTOM runs on a 5v supply, you can then pick up a switched feed from the fuse box, located behind the side panel on the drivers side. When i get a chance later tomorrow I'll post some pics of how to do it, any questions just PM me.
Cheers
Richard
rayatt
12-11-2008, 01:39 PM
I understand one option is to wire in a basic cigar lighter unit behind the dash into which the standard TomTom power plug will fit.
If this has any merit, then where do I pick up a fused feed?
Lord Buckingham
15-11-2008, 10:53 AM
Sorry for the delayed reply, waiting for it to stop raining ;)
Anyway, here's how I connected mine.
1) Remove fuse box cover
http://img135.imageshack.us/img135/5099/dsc00488ah6.th.jpg (http://img135.imageshack.us/my.php?image=dsc00488ah6.jpg)http://img135.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
http://img510.imageshack.us/img510/2450/dsc00489lk0.th.jpg (http://img510.imageshack.us/my.php?image=dsc00489lk0.jpg)http://img510.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
Remove the panel under the steering wheel, held on by 3 bolts, one above and left of the fuse box and 2 underneath. Locate the diagnostic port in the lower right hand side of the panel, and pop it out, there are 3 sprung plastic clips that hold it in place.
http://img513.imageshack.us/img513/6444/dsc00491vh0.th.jpg (http://img513.imageshack.us/my.php?image=dsc00491vh0.jpg)http://img513.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
Front left pin should be a switched 12 volt feed, (but check with multimeter just to be certain, and there you go, connect via a suitable fuse and run power cable, the earth can be picked up locally.
Here is mine run along the gap between windscreen and dashboard to my TOMTOM unit.
http://img513.imageshack.us/img513/3108/dsc00492zb0.th.jpg (http://img513.imageshack.us/my.php?image=dsc00492zb0.jpg)http://img513.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
Hope this helps.
Cheers
Richard
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.