rhc21
08-10-2008, 02:18 AM
Hi,
I'm looking at fitting cruise and dis on my 2007 2.0 TDI S-line Multitronic and have been reading the coding in prep. One thing I can't work out from searching everywhere is the coding for the abs as i see it should be 4259 (pr code = 1LB from the sticker?) where as mine reports below?
Address 03: ABS Brakes Labels: 8E0-910-517.lbl
Part No SW: 8E0 910 517 H HW: 8E0 614 517 BF
Component: ESP8 FRONT H06 0140
Revision: 00000000 Serial number: 00000000000000
Coding: 0004402
Shop #: WSC 06335 000 00000
No fault code found.
I have the MFSW so assume it should be just add the stalk but as i'll need to do the abs after I'm a bit concerned egarding the login and coding.
The other modules such as the steering wheel report the correct coding as i would expect.
Any ideas on why this code is as it is?:confused:
R
I'm looking at fitting cruise and dis on my 2007 2.0 TDI S-line Multitronic and have been reading the coding in prep. One thing I can't work out from searching everywhere is the coding for the abs as i see it should be 4259 (pr code = 1LB from the sticker?) where as mine reports below?
Address 03: ABS Brakes Labels: 8E0-910-517.lbl
Part No SW: 8E0 910 517 H HW: 8E0 614 517 BF
Component: ESP8 FRONT H06 0140
Revision: 00000000 Serial number: 00000000000000
Coding: 0004402
Shop #: WSC 06335 000 00000
No fault code found.
I have the MFSW so assume it should be just add the stalk but as i'll need to do the abs after I'm a bit concerned egarding the login and coding.
The other modules such as the steering wheel report the correct coding as i would expect.
Any ideas on why this code is as it is?:confused:
R