View Full Version : Question Audi a4 b7 suspension
Zakaudi
13-06-2008, 01:48 PM
Hi Guys!
Im new to this so please bare with me!
Just recently bought an Audi A4 Quattro S line on a 05 plate (B7), I have 1 question which is driving me nuts and hope some one can give me the answer?
From my understanding the s line models have a lower suspention setting to the base and se models, but how low?
I was thinking of upgrading my suspension to eibach springs but taking into account i already have an S line set up will it be worth the cost?
What is the difference in height by mm in the eibach springs and the standard s line springs?
:1zhelp:
Thank you guys
Crasher
14-06-2008, 11:18 AM
The S line is about 10 to 15-mm lower and the Eibach’s will be about 25-mm lower again as they give approx 40-mm on a standard car.
Zakaudi
14-06-2008, 04:23 PM
Thank you for your reply, im at ease now!
:beerchug:
But im slightly confused :confused:
Now i know the difference between the two im in a slight dilemma?
Im thinking of getting a set of Rs4 19" black alloys from ebay (see the link)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170226972018&_trksid=p3907.m32&_trkparms=tab%3DWatching
Do you think it will be worth me getting the 19" alloys and also dropping it on the Eibach?
or should i just forget about the Eibach, your input would be greatful?
Crasher
14-06-2008, 10:58 PM
They don't list the ET of those wheels or the intended tyre dimensions. PM me your chassis or reg number.
Zakaudi
15-06-2008, 01:57 PM
Hi Crasher sorry cant PM as im new to the site and "BIG BROTHER" wont allow access!
my reg: (I trust you guyz) ;)
Thanks once again
Crasher
15-06-2008, 02:43 PM
Delete that reg number now. Audi’s maximum recommend size for an 8EC 0E9 (which is what I think your cars is) is an 8x18 ET40 running 235/4018 tyres so an 8x19 would need a 235/35 19 tyre. Unfortunately that advert doesn’t tell you tyre or wheel ET info.
Zakaudi
15-06-2008, 02:53 PM
:beerchug:
tails
15-06-2008, 04:53 PM
Do both, post the pics of the completed job.
jeepis
25-06-2008, 11:31 PM
Hi. Here you go picture B7 Avant of mine with R19 8.0J et35 with 235/35 GoodYear
Front lowering -35mm(weitec), rear stock s-line about -25mm
http://www.vwaudiforum.co.uk/forum/attachment.php?attachmentid=3022&stc=1&d=1214432940
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.