lowering audi 80 tdi

[audijay73]

i have an 80 tdi 1994 on m plate i have fitted boge gas shocks on front and dropped it on front 40mm i havent done the back as most of the time i am driving with weight in the boot wich automaticly lowers it by 15 to 20mm i have the boge shocks for the back but i dont want to put them on with the springs from the kit as i think it will sit to low can anyone sugest anything jay in lancashire

[baltiboys2]

Mine is lowered al round by 40 and it does not move much at all with a load in in it

do you still have the original springs for the front by any chance

cheers Raj

[Ryan80]

It can never be too low!! Mine avant is lowered on 60mm wietec springs and shocks and i wish it was a wee tiny bit lower!! It only moves by a few mm when im towing car trailers, so i wouldnt worry too much!!

[audijay73]

ive put the shocks and springs on the rear so its good all round not to firm handles well my next mision if anyone can help ive bought a 80 quattro 2.8 on a 1993 k plate i cant wait to sort handling out and most of all brakes then im going to give the engine a few horses extra i am open to advice on shocks, springs , bushes ,brakes ,and power :biglaugh:

[audijay73]

by the way raj i do have the original springs what are your plans for them or are they just a replacement cheers jaylancs