DIYeer
09-03-2025, 12:36 PM
Hi all,
This is probably a dated request these days but I've got a 2007 Passat 1.9 TDI, its a comfortline model and came with half MFD and no MFSW.
I upgraded the cluster to full Red MFD and it works fine but I can't navigate the menu as I've got no buttons on the wiper stalk or MFSW, so this sent me down the rabbit hole of trying to upgrade to MFSW.
Here's a picture of the current module, clockspring, stalks, airbag harness and airbag
39612
39609
39610
39611
So off I went and purchased the following:
Wheel with MFSW buttons minus the Airbag
Airbag harness 1K0 971 584C
Highline module 3C0 953 549 M
Given that I never used VCDS to do any coding before, I thought I'll just start with fitting the module with my current setup and see how it went. I scanned the current module and got the following and thought easy peasy, plug in the highlane module and match it up and away we go..... Now hands up I didn't make a note of the coding on the new highline module prior to changing the code I just updated it to match the previous and then the horn on the car wouldn't stop !! Great I thought what have a broken now...I removed the key to make the horn stop and put back in the original module and everything returned to normal and left it be for a few weeks.
Today I thought I'd give it a look over in case I typed something wrong in the coding but it's identical to the previous module
39613
I'm obviously not understanding the compatibility or I've balls'd something up, I could really do with some advice and would appreciate any help to get me on the right track please
This is probably a dated request these days but I've got a 2007 Passat 1.9 TDI, its a comfortline model and came with half MFD and no MFSW.
I upgraded the cluster to full Red MFD and it works fine but I can't navigate the menu as I've got no buttons on the wiper stalk or MFSW, so this sent me down the rabbit hole of trying to upgrade to MFSW.
Here's a picture of the current module, clockspring, stalks, airbag harness and airbag
39612
39609
39610
39611
So off I went and purchased the following:
Wheel with MFSW buttons minus the Airbag
Airbag harness 1K0 971 584C
Highline module 3C0 953 549 M
Given that I never used VCDS to do any coding before, I thought I'll just start with fitting the module with my current setup and see how it went. I scanned the current module and got the following and thought easy peasy, plug in the highlane module and match it up and away we go..... Now hands up I didn't make a note of the coding on the new highline module prior to changing the code I just updated it to match the previous and then the horn on the car wouldn't stop !! Great I thought what have a broken now...I removed the key to make the horn stop and put back in the original module and everything returned to normal and left it be for a few weeks.
Today I thought I'd give it a look over in case I typed something wrong in the coding but it's identical to the previous module
39613
I'm obviously not understanding the compatibility or I've balls'd something up, I could really do with some advice and would appreciate any help to get me on the right track please