Aftermarket Anti Roll Bar for Audi A6 (C7)

[lifemoveon]

Hi everyone,

It's been a very long time since I made my last post. Hope everyone here has been well.

Just like to ask if anyone here has fitted an aftermarket anti-roll bar on their Audi A6 (c7).

I'm thinking of fitting them on. I find that when cornering at a round-about, the car rolls alot. I'm trying to get the car to corner a little flatter.

From my internet research so far, I've found the H&R ones. However there are no reviews on it.

Just thought of asking here if anyone tried them? Or any other aftermarket ones.

Thank you.

[gareth23]

Will an Audi one meant for an RS6 fit?

I had the same annoying roll on my last A4 and fitted the larger stiffer bar meant for an RS4, it was a decent improvement and was far cheaper than any aftermarket bar I could find.

[Johnny31]

My A6 Avant quattro (born as a SE) got Eibach springs, Bilstein shocks and RS6 ARBs. Trust me, you don't want anything firmer - and this produced a night and day difference.

HTH

Sent from my KB2003 using Tapatalk

[lifemoveon]

Oh wow... these are great information. I'm not sure about the RS6 ARB but I'll give it a good go! Sounds like a much cheaper option.

[shuggy2005]

I have done some research on this myself and I believe I read that the H&R (front) bar is a little longer at the ends which made it rub against some of the suspension on the car, so I read the owner had to shave the ARB a little to avoid the contact.

I think the H&R is thicker than the OEM RS6 one aswell.