04 1.9 auy size of turbo/ egr vacuum pipes

[ad777]

Hi there,
As above! I have a leak in vacuum pipes somewhere, want to buy a 5 m roll and replace it all. Can someone tell me what guage I am looking for? Many thanks in advance.

[Crasher]

Going by the measurements on ETKA, you need 1110mm (360, 50, 320, 80, 300) of what they spec as 5x3 N 0202 282 1 and 3165mm (1000, 45, 70, 880, 300, 440, 350, 80) of 3.5x2 N 020 353 27.

[ad777]

Thanks for that. Am struggling to work out the size...is that 5mm and 3.2mm guage? Any suggestions where I can buy lengths to cut? Any would you by any chance have a vacuum pipe diagram! Appreciated.

[mickeybo]

THe inside dia on vac pipes must/has to be a 3.2mm to be a very snug fault

[ad777]

Thank you. I have bought 3 mm silicon piping, which apparently has a bit of stretch to it. If you think I have done the wrong thing please let me know! Cheers

[Crasher]

VAG call it 3.5 but as Mike says it really measures 3.2mm and certain applications it is 2.8.

[ad777]

Thanks. So will 3mm silicon pipe fit ok?

[Crasher]

You can make anything fit with some lubricant and if you push hard enough :naughty:

[ad777]

Plenty lube...its going on!:D