Fitted glow plug 3 but still EM light came back on

[jpvw_11]

Hi All

Crasher or other VAG expertsif you are out there..
I have replaced cylinder 3 (pressure sensor) glow plug but still getting 3 faults light came back on 2days later.

obd reading after scan
P13D400 - Sensor for internal pressure of cylinder 3 Electrical error
Intermittent
P13D600 - Sensor for internal pressure of cylinder 3 Implausible signal
Intermittent
P13D600 - Sensor for internal pressure of cylinder 3 Implausible signal
Intermittent

Please let me know if I am overlooking something simple somewhere...

Many thanks
J

[jpvw_11]

Passat 2016 2.0 TDI 150bhp manual I should have stated..
Wrong glow plug- is this a possibility?

[UMEL]

Crasher states here no 3 is a special GP.

Glow plugs? | UK Volkswagen Forum (https://www.volkswagenforum.co.uk/threads/glow-plugs.36841/)

[Crasher]

What is the VIN and which make and part number did you fit?

[jpvw_11]

What is the VIN and which make and part number did you fit?

Sorry just got this reply.
Will post up tmrow. Thanks

[jpvw_11]

What is the VIN and which make and part number did you fit?

WVWZZZ3CZGE205248
Engine #
CRLB347044

Pic attached of the cylinder 3 pressure sensor glow plug

[jpvw_11]

Text from box
PSG007
E25200028814

It's a Beru.

[Crasher]

Borg Warner brand BERU, my preferred brand of glow plug. Cylinder 1, 2 and 4 are new VAG part number 059 963 319 AB for BERU and their number GE133 and cylinder 3 with pressure sensor is VAG 03L 905 061 L and a BERU PSG 007 so you are looking at a wiring or controller fault.

[jpvw_11]

Borg Warner brand BERU, my preferred brand of glow plug. Cylinder 1, 2 and 4 are new VAG part number 059 963 319 AB for BERU and their number GE133 and cylinder 3 with pressure sensor is VAG 03L 905 061 L and a BERU PSG 007 so you are looking at a wiring or controller fault.

Ok thanks for that appreciate your input Crasher.
I'll look into the wiring harness.
When u say controller fault - can I clarify is that the relay for glow plugs?

Thanks.

[Crasher]

I will look at the wiring diagram tomorrow

[jpvw_11]

I will look at the wiring diagram tomorrow

Super - thank you.

[mickeybo]

can you post up your reg no 0r engine code

[jpvw_11]

can you post up your reg no 0r engine code

WVWZZZ3CZGE205248
Engine #
CRLB347044

[jpvw_11]

[QUOTE=jpvw_11;1148934]Super - thank you.[/QUOTE

So looks like the glow plug 3 pressure sensor was faulty. Got a second new one and ok so far..

[Crasher]

Got to fit a set of the exact same parts to a T6 this week.