carvalhito
11-04-2021, 10:36 AM
Hi all,
I'm having a problem with my 2015 Touareg because Iretrofited several driver assistance items and cannot turn them working...
The retrofit I made was adding the windshield camera, image processing unit and rate pitch sensor to have lane assist and traffic sign recognitions.
The cables are from Kufatec and after conencting all the wires when I connect VCDS, I have errors on module 19 Can Gateway and 8E Image processing.
This is part of the scan.
The error on module 8E could be because my gateway cannot handle flexray?
I need any help from anyone.
Saturday,10,April,2021,17:02:57:55334
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 21.3.0.0 (x64) HEX-V2 CB: 0.4543.4
Data version: 20210226 DS325.0
www.Ross-Tech.com (https://l.facebook.com/l.php?u=http%3A%2F%2Fwww.Ross-Tech.com%2F%3Ffbclid%3DIwAR24DF1qJzPJ-6ZI-CQlvqRicnMU_CErOGLWmoVhTnL3dEu2D_CGF4Rb_5U&h=AT3TVFK3D19M3vHExOhGAc1KPF6zWQo4TpPHAK2t0Bbk7i0P 3JYzMSPStL4Mw0Hq3y7T946IbR0BvFp2QJdiWzhn8hb0rv_1pM JNCmA8fiepdomlZVKwSNHSYc0xZGh7&__tn__=-UK-R&c[0]=AT3TFbbk3G91MS1HqnPOrpduU8izyQ3evAfsoLp6Ru5gtXWFH 9RLn8-DB1nC76pP47OMTkirDypQyC2zx_rr5zExHToePQaFtc6apnmUv aX7wZbRdLp2qCNOOI-ZMXNMiC19llVqItb-RabvdAUcF_jePI6C0wqvtxiCHzxZ9aWjJNbTVKrC4oofNr5tuG E3gaFEaCf3iYMOWHZ7sQ)
VIN: WVGZZZ7PZFD009373 License Plate:
Mileage: 114642km-71235mi Repair Order:
Chassis Type: 7P-VW52 (7P6)
Scan: 01 02 03 05 06 08 09 10 15 16 17 19 22 32 34 36 42 46 52 53
55 56 5F 62 65 69 6C 72 85 8E
VIN: WVGZZZ7PZFD009373 Mileage: 114642km-71235miles
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
06-Seat Mem. Pass -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
22-AWD -- Status: OK 0000
32-Differential Locks -- Status: OK 0000
34-Level Control -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
62-Door, Rear Left -- Status: OK 0000
65-Tire Pressure -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
85-On Board Cam. -- Status: OK 0000
8E-Image Processing -- Status: Cannot be reached 0100
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:* None
Part No SW: 7P6 907 530 M HW: 7P6 907 530 F
Component: GW-CAN-L-MOST H13 6042
Revision: -------- Serial number: 00000001669421
Coding: 000D0FAD00
Shop #: WSC 31414 790 00001
ASAM Dataset: EV_GatewVW526UDS 001007
ROD: EV_GatewUDS_VW52.rod
VCID: 42DCB5BC5402537BD97-8016
Battery Monitoring Control Module:
Subsystem 1 - Part No SW: 7P0 915 181 B HW: 7P0 915 181
Component: Batt_Sensor H07 0190
Serial number: 41328F28565701129653
Voltage stabilizer:
Subsystem 2 - Part No SW: 7PP 959 663 E HW: 7PP 959 663 E
Component: J532_DCDCStab H17 0042
Serial number: 14343005053021200181
Battery Monitoring Control Module 2:
1 Fault Found:
0276 - FlexRay Databus
U1032 00 [009] - Initialization Failed
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 41
Mileage: 114642 km
Date: 2021.04.10
Time: 16:56:52
Voltage terminal 30: 12.3 V
Voltage terminal 15: 12.3 V
Control Module temperature: 35 °C
System status: Terminal 15 on
IN ESP_standstill flag: standstill detected
Engine running: OFF
IN ZAS_Te_X: On
Terminal 15 status via CAN: On
Terminal 15 status: On
Datenfeld: 0
-------------------------------------------------------------------------------
Address 8E: Image Processing
Cannot be reached
End----------(Elapsed Time: 02:14, VBatt start/end: 12.4V/12.4V)-----------
I'm having a problem with my 2015 Touareg because Iretrofited several driver assistance items and cannot turn them working...
The retrofit I made was adding the windshield camera, image processing unit and rate pitch sensor to have lane assist and traffic sign recognitions.
The cables are from Kufatec and after conencting all the wires when I connect VCDS, I have errors on module 19 Can Gateway and 8E Image processing.
This is part of the scan.
The error on module 8E could be because my gateway cannot handle flexray?
I need any help from anyone.
Saturday,10,April,2021,17:02:57:55334
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 21.3.0.0 (x64) HEX-V2 CB: 0.4543.4
Data version: 20210226 DS325.0
www.Ross-Tech.com (https://l.facebook.com/l.php?u=http%3A%2F%2Fwww.Ross-Tech.com%2F%3Ffbclid%3DIwAR24DF1qJzPJ-6ZI-CQlvqRicnMU_CErOGLWmoVhTnL3dEu2D_CGF4Rb_5U&h=AT3TVFK3D19M3vHExOhGAc1KPF6zWQo4TpPHAK2t0Bbk7i0P 3JYzMSPStL4Mw0Hq3y7T946IbR0BvFp2QJdiWzhn8hb0rv_1pM JNCmA8fiepdomlZVKwSNHSYc0xZGh7&__tn__=-UK-R&c[0]=AT3TFbbk3G91MS1HqnPOrpduU8izyQ3evAfsoLp6Ru5gtXWFH 9RLn8-DB1nC76pP47OMTkirDypQyC2zx_rr5zExHToePQaFtc6apnmUv aX7wZbRdLp2qCNOOI-ZMXNMiC19llVqItb-RabvdAUcF_jePI6C0wqvtxiCHzxZ9aWjJNbTVKrC4oofNr5tuG E3gaFEaCf3iYMOWHZ7sQ)
VIN: WVGZZZ7PZFD009373 License Plate:
Mileage: 114642km-71235mi Repair Order:
Chassis Type: 7P-VW52 (7P6)
Scan: 01 02 03 05 06 08 09 10 15 16 17 19 22 32 34 36 42 46 52 53
55 56 5F 62 65 69 6C 72 85 8E
VIN: WVGZZZ7PZFD009373 Mileage: 114642km-71235miles
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
06-Seat Mem. Pass -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
22-AWD -- Status: OK 0000
32-Differential Locks -- Status: OK 0000
34-Level Control -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
62-Door, Rear Left -- Status: OK 0000
65-Tire Pressure -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
85-On Board Cam. -- Status: OK 0000
8E-Image Processing -- Status: Cannot be reached 0100
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:* None
Part No SW: 7P6 907 530 M HW: 7P6 907 530 F
Component: GW-CAN-L-MOST H13 6042
Revision: -------- Serial number: 00000001669421
Coding: 000D0FAD00
Shop #: WSC 31414 790 00001
ASAM Dataset: EV_GatewVW526UDS 001007
ROD: EV_GatewUDS_VW52.rod
VCID: 42DCB5BC5402537BD97-8016
Battery Monitoring Control Module:
Subsystem 1 - Part No SW: 7P0 915 181 B HW: 7P0 915 181
Component: Batt_Sensor H07 0190
Serial number: 41328F28565701129653
Voltage stabilizer:
Subsystem 2 - Part No SW: 7PP 959 663 E HW: 7PP 959 663 E
Component: J532_DCDCStab H17 0042
Serial number: 14343005053021200181
Battery Monitoring Control Module 2:
1 Fault Found:
0276 - FlexRay Databus
U1032 00 [009] - Initialization Failed
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 41
Mileage: 114642 km
Date: 2021.04.10
Time: 16:56:52
Voltage terminal 30: 12.3 V
Voltage terminal 15: 12.3 V
Control Module temperature: 35 °C
System status: Terminal 15 on
IN ESP_standstill flag: standstill detected
Engine running: OFF
IN ZAS_Te_X: On
Terminal 15 status via CAN: On
Terminal 15 status: On
Datenfeld: 0
-------------------------------------------------------------------------------
Address 8E: Image Processing
Cannot be reached
End----------(Elapsed Time: 02:14, VBatt start/end: 12.4V/12.4V)-----------