Johnny31
04-07-2020, 04:49 PM
So, got a strange one a few days back: the car reported "adaptive lights malfunction". It went off and on a few times since then.
The error picked up by OBD11pro is as following:
*** Year: 2013
*** Body type: Avant
*** Engine: CDUD 180 kW (244 HP) 3.0 l
*** Mileage: 115773 KM
---------------------------------------------------------------
55 Headlight Regulation
*** System description: ....AFS13....
*** Software number: 4H4907357C*
*** Software version: 0020
*** Hardware number: 4H4907357A*
*** Hardware version: H01
*** Serial number: 130503-0004-0543**
*** ODX name: EV_AdvanFrontSyste
*** ODX version: 005001
*** Long coding: 1122A633F818E300
*** Trouble codes:*
******* C108313 - Left stationary AFS Open circuit
*********** static
*************** Date: 2020-07-04 16:24:46
*************** Mileage: 115773 km
*************** Priority: 2
*************** Malfunction frequency counter: 1
*************** Unlearning counter: 254
Sometimes it pops up after clearing the code immediately, sometimes, it does not come up at all.
Hence, as I had some fun with swapping springs recently, can it be related to this? If not, what's the culprit and where is it located? :)
Sent from my mobile...
The error picked up by OBD11pro is as following:
*** Year: 2013
*** Body type: Avant
*** Engine: CDUD 180 kW (244 HP) 3.0 l
*** Mileage: 115773 KM
---------------------------------------------------------------
55 Headlight Regulation
*** System description: ....AFS13....
*** Software number: 4H4907357C*
*** Software version: 0020
*** Hardware number: 4H4907357A*
*** Hardware version: H01
*** Serial number: 130503-0004-0543**
*** ODX name: EV_AdvanFrontSyste
*** ODX version: 005001
*** Long coding: 1122A633F818E300
*** Trouble codes:*
******* C108313 - Left stationary AFS Open circuit
*********** static
*************** Date: 2020-07-04 16:24:46
*************** Mileage: 115773 km
*************** Priority: 2
*************** Malfunction frequency counter: 1
*************** Unlearning counter: 254
Sometimes it pops up after clearing the code immediately, sometimes, it does not come up at all.
Hence, as I had some fun with swapping springs recently, can it be related to this? If not, what's the culprit and where is it located? :)
Sent from my mobile...