TRW caliper key

[gadugadu]

Hi Im looking key for caliper see picture below is 10 point end ( Triple Square sockets are incorect as they have 11/12 points)
I think correct key is M12,3 mm 1/2 10points or M12.4mm 1/2 10 points but i cant find that in uk

Thank You





36750

[dean warren]

Why did you need to take them out?


Sent from my iPhone using Tapatalk

[gadugadu]

hmm long story I damaged thread on my caliper (hose one) caliper is already painted so I bought another one (used) where i want to swap only back part

If You have any information about that key i will be much appraised



Key which is required looking like on pictures
3675236751

[KevTrem]

I would be painting the new caliper to match the others then fit that rather than risking nipping seals etc during rebuild.

[Elansear]

Hi think what you need is a spline drive socket, have just ordered some for the drive shafts on the TT, from Amazon. Measure across the internet splines for the size then search Amazon for spline drive sockets. Good luck.

[Waddie]

isn't it just an ordinary torx drive you need?

[Elansear]

I thought that was what I needed for the TT. Undid the first bolt with a T50 only to find it was a splined bolt. Everything I had read on the net related to T50 but that was not the case. Think Torx do not have as many points.

[dean warren]

I thought that was what I needed for the TT. Undid the first bolt with a T50 only to find it was a splined bolt. Everything I had read on the net related to T50 but that was not the case. Think Torx do not have as many points.

Yeah multi spline tool not a T50


Sent from my iPhone using Tapatalk