Hard coolant pipe removal on Audi tt BAM

[dannyboy1987]

Hi there I needed some advice on removing the hard metal coolant that goes into the block. There a bit where it goes into the block next to the thermostat (where the red line points to, how do you remove it.
Thankshttps://uploads.tapatalk-cdn.com/20190723/8d31471c24e00c82739e8adc397b9518.jpg

Sent from my SM-G975F using Tapatalk

[Crasher]

there is a bolt into the head around the corner to the right of the picture, it has a 5mm hex cap head. The pipe is pushed into the block and sealed with an O ring but due to rust can take a LOT of force to get out. I would unbolt the knock sensors and get them out of harms way, their bolts MUST be done to exactly 20Nm.

[dannyboy1987]

Nice 1 Crasher. Thanks for the advice

Sent from my SM-G975F using Tapatalk