PDA

View Full Version : rns-e quadlock to standard iso harness



robert1z
08-07-2019, 06:30 PM
Hi

I am in the process of replacing the Head Unit on my Audi A6 c5 final edition with an aftermarket one. I think the current system has full Bose with sub in the boot version.
Someone in the past has fitted a parrot bluetooth kit and hacked a fair amount of original loom out. The rear speakers nor the sub in the boot work have never worked in my ownership. The RNS-E sat nav is old and dated and there are no driver controls that link to the HU so going to replace.
36066


Ideally I need a harness that may make this simpler.
I don't need a full plug and play harness that works with Bose, just one that can take the power cables and maybe speaker wires into a standard ISO so I can link to my head unit to make it easier. I don't mind doing some manual wiring but did not want to do the whole lot with bullet connectors etc.
The only thing I know I need is the Dual Fakra DIN adaptor for the aerial connection.

Any ideas??

Many Thanks
Robbie

Model number
36067

robert1z
11-07-2019, 07:00 PM
Well I have had a fiddle about and the AMP and wiring at the back aren't doing anything at all. I unplugged it and made no difference so all I need is a basic permanent live switched live, speakers etc wired up I think.
Does anyone know if a basic Quadlock plug will give me what I want?
36077

Something like this? CT20AU08 AUDI A6 2004 to 2011 QUADLOCK FAKRA CAR HARNESS ADAPTER WIRING LEAD | eBay (https://www.ebay.co.uk/i/401160842492) ?