Audi A4 B8 2009 Variable Cam Lift Actuator Identification

[Davmar]

Hi All,
Audi 2.0tfsi s line 2009 127K

VCDS is showing following
7207 - Cam Adjustment Actuator A; Cylinder 1 P11A1 00 [109] - Elec. Malf. or Open Circuit
Confirmed
as there are 2 actuators per cylinder would i be correct in assuming one is A & the other B ? to identify which is which
therefore would the first actuator from front of engine cylinder 1 be Actuator A?

Any assistance you guys can shed will be greatly appreciated.:o

[Crasher]

I need you to PM me your REG or VIN to help with this.

[Crasher]

Cylinder 1 is at the cam chain end and the part number of the thrice revised adjuster is 06H 103 697 C and not sill money at £33.23. As I am off for a week that is the most detailed information I can give you.

[Davmar]

Cheers Crasher,
Appreciated will delve further.

[Davmar]

Hi All,

Having Delved further checking resistance of Actuator coils & readings all very similar i noticed 2nd Actuator plug broken inside Actuator. Sorry cant get pictures to upload showing detail!

Has anyone had similar issue & are replacement plugs available?

Thanx in advance all.

[Crasher]

Yes the plug will be available but I can’t look the number up until next week, they can be tricky to change without damaging the terminals and that complicates matters.

[Davmar]

Cheers Crasher,

Sorted TPS dont do the plug Audi Main Dealer didn't have & rerouted me to Volkswagen dealer Part No V4HO 973 702 A £2.38 cheap as chips.

Didnt come with new terminals so had to remove broken ones from damaged plug & solder to broken Terminal on end of wires, bit of a ball ache but succeeded Cleared codes in VCDS & Re scanned all GOOD

Many thanx for your assistance.

[Crasher]

They should have advised you to buy the matching repair wire.

[Davmar]

In this particular case Im glad its sorted!!!! maybe Ignorance is Bliss after all Thanx again for your input.