62 Plate Alhambra SE LUX Edition Error codes

[Amirkhan26]

Hi Everyone,

I've just bought an Alhambra SE LUX 2.0 TDI 62 Plate.

I've had a few VW Golf's and any faults that appear I resolve myself with the help of VCDS; However I'm a little confused with the error codes the Alhambra has got so I was hoping people on here may help.

Here's the three error codes thrown up:
Address 09: Cent. Elect. (J519) Labels: Redir Fail!
Part No SW: 5K0 937 086 M HW: 5K0 937 086 M
Component: BCM PQ35 M 021 0068
Revision: BC021001
Coding: 40590A3B8925F1C0508800C87400816443519288636D2D6264 80C72000C1
Shop #: WSC 00020 790 00000
VCID: 3E74E5BAA9ECF5BAE7-806A

Subsystem 1 - Part No SW: 7N2 955 119 A HW: 7N2 955 119
Component: WWS 120522 31 0032
Serial number: 120612041639
Coding: 004DBD

Subsystem 2 - Part No SW: 7N0 955 559 HW: 7N0 955 559
Component: RLFS 021 0024
Serial number: Y12M06D20h14m15s39S4
Coding: 0280DD

Subsystem 3 - Part No: 7N0 951 171 A
Component: DWA-Sensor 00 002 0206
Coding: 000000

Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000

1 Fault Found
00924 - Relay for Headlamp Cleaning System (J39)
009 - Open or Short to Ground
Freeze Frame:
Fault Status: 01101001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 31
Mileage: 325970 km
Time Indication: 0
Date: 2006.14.15
Time: 08:42:43

Freeze Frame:
Term 15 On
Voltage: 14.50 V
ON
ON
ON
OFF
OFF
---------------------------------------------------------------------------------------------------------------------

Address 18: Aux. Heat Labels: 1K0-815-071.clb
Part No: 7N0 963 271 E
Component: Zuheizer 051 2940
Revision: 00051000 Serial number: 09024297000000
Coding: 0000041
Shop #: WSC 00020 790 00000
VCID: 3664FD9A41DC3DFA3F-8062

1 Fault Found
01415 - Recirculating Pump (V55)
007 - Short to Ground
Freeze Frame:
Fault Status: 01100111
Fault Priority: 3
Fault Frequency: 1
Reset counter: 31
Mileage: 325970 km
Time Indication: 0
Date: 2006.14.15
Time: 08:42:60

Freeze Frame:
OFF
Temperature: 43.0°C
Temperature: 45.0°C
Voltage: 14.53 V


---------------------------------------------------------------------------------------

Address 72: Door, Rear Right (J389) Labels:. 7N0-959-794.clb
Part No SW: 7N0 959 794 H HW: 7N0 959 794 H
Component: TSG HR H01 0553
Revision: Serial number: 0000128405793
Coding: 01006C200001411001
Shop #: WSC 00020 790 00000
VCID: 48988362FB28BB0A5D-801C

1 Fault Found
02115 - Locking Unit for Central Locking
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 73
Mileage: 325985 km
Time Indication: 0
Date: 2006.14.16
Time: 08:32:27


-------------------------------------------------------------------------------
Address BE: Slid. Door Rear Left
Cannot be reached

-------------------------------------------------------------------------------
Address BF: Slid. Door Rear Right (J731) Labels: None
Part No SW: 7N0 959 244 A HW: 7N0 959 244 A
Component: Schiebetuer_r 005 2314
Serial number: 12224821
ASAM Dataset: EV_AST A03704
ROD: EV_AST.rod
VCID: 377AF09E8ED6C4F224-8062

1 Fault Found
49153 - Supply voltage
U1011 00 [008] - Voltage too Low
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 2
Reset counter: 67
Mileage: 325934 km
Date: 2070.14.08
Time: 18:01:35

Voltage terminal 30: 7.9 V
Sliding_Door_Motor_Current: 0.0 A
Sliding_Door_Clutch_Current: 0 A
Sliding_Door_Locking_Pawl_Motor_Current: 0 A
Front button for automatic sliding door: not activated
Rear button for automatic sliding door: not activated
Installed on left side: No
Installed on right side: Yes
Pinch protection sensor: not activated
Latch_Ajar: operated
Latch_Pawl: operated
Sliding door indicator lamp: not active
Sliding door indicator lamp 2: not active
Activation: motor for automatic sliding door: not active
Automatic sliding door coupling motor activation: not active
Motor activation for enabling ratchet release: not active
Sliding_Door_Feedback_Motor_Opening: not active
Sliding_Door_Feedback_Motor_Closing: not active
Sliding_Door_Feedback_Locking_Pawl_Motor_Opening: not active
Sliding_Door_Feedback_Locking_Pawl_Motor_Reversing : not active
Sliding_Door_Feedback_Clutch_In: not active
Sliding_Door_Feedback_Clutch_Out: not active
Sliding_Door_Feedback_Indicator_Light_Front: not active
Sliding_Door_Feedback_Indicator_Light_Rear: not active
AD-Value clamping_Protection_Seal: 100
Position of automatic sliding door: 0
Status_Sliding_Door: latch secondary position
Play protection: motor for automatic sliding door: not active
Play protection: motor for enabling ratchet release: not active
Play protection: automatic sliding door coupling motor: not active
Status_Locking_Pawl_Motor: closed
Status_Clutch_Motor: Open




Can anyone help with resolving the above error codes? Where can I locate and replace/rectify the affected control unit? P.S. I have just installed a brand new Bosch AGM Battery


Thanks in Advance!!!!

[Crasher]

Make sure it is fully charged on the new battery, clear the codes, drive, read again see what happens. The headlight wash relay, does it have headlight wash?

[Amirkhan26]

Hey,

I cleared all the codes and they come back immediately after!?

*Edit* Yes the car has headlight washer system

[Crasher]

Please message me the UK REG or VIN and I can dig deeper on Monday at work.

[Amirkhan26]

Please message me the UK REG or VIN and I can dig deeper on Monday at work.

PM'd - Thanks!

[Crasher]

According to their date stamps those codes are old, some from 2013, don’t trust the VCDS auto clear, it does not always work, do each one individually.