dave21184
17-08-2018, 04:59 AM
I have a 2014 Q7 245ps and the engine management light has come on. After reading the code and a bit of fault finding I have a question.
All sites and info point to the swirl flaps in the intake manifold and actuator motors, link arms ect but I am unable to find these on my engine. All pictures and info I can find relate to having intake manifold 059129711AL (not sure if its the right number) but on my engine the intake manifold is 059129711CF. could it possibly be the flap in the throttle body 059129593H. I took it off but still connected and reset the code, when starting the car again the flap moves about 1/10 to closed 3 times then stops and the code reappears. I know this is a common fault on these cars and am unsure why I have a different manifold.
any help would be appreciated.
35171]
Note, this is not a pic of my actual engine its taken from online but has the same components.
All sites and info point to the swirl flaps in the intake manifold and actuator motors, link arms ect but I am unable to find these on my engine. All pictures and info I can find relate to having intake manifold 059129711AL (not sure if its the right number) but on my engine the intake manifold is 059129711CF. could it possibly be the flap in the throttle body 059129593H. I took it off but still connected and reset the code, when starting the car again the flap moves about 1/10 to closed 3 times then stops and the code reappears. I know this is a common fault on these cars and am unsure why I have a different manifold.
any help would be appreciated.
35171]
Note, this is not a pic of my actual engine its taken from online but has the same components.