VCDS Fault Codes Help VW GOLF MK6 1.6TDI

[kiran28]

Hi All

I recently ran VCDS on my VW GOLF MK6 1.6TDI and the following codes appeared.
Address 01: Engine (J623-CAYC) Labels: 03L-906-023-CAY.clb
Part No SW: 03L 906 023 B HW: 03L 906 023 A
Component: 1,6l R4 CR td H23 9971
Revision: --H23--- Serial number: 00000000000000
Coding: 00114014030500080000
Shop #: WSC 64083 001 1048576
ASAM Dataset: EV_ECM16TDI02103L906023B 003011
ROD: EV_ECM16TDI02103L906023DB.rod
VCID: 254197B1243095699C-8070


2 Faults Found:
6158 - Internal Control Module
P0601 00 [096] - Memory Check Sum Error
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Date: 2000.00.00
Time: 00:00:00


Engine speed: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 93 ∞C
Intake air temperature: 29 ∞C
Ambient air pressure: 990 mbar
Voltage terminal 30: 8.019 V
Unlearning counter according OBD: 2
EEPROM malfunction status-FRF_EEPROM: 0
Hardware monitoring of EEPROM status-FRF_HWMT_EEPROM: 3
Coding in the engine control module-FRF_VARCOD: 3
Immobilizer snapshot A: FF


10165 - Glow Plug Module 1; Glow Plug Circuit
P0670 00 [237] - Electrical Malfunction
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 45459 km
Date: 2017.03.20
Time: 07:44:17


Engine speed: 801.00 /min
Normed load value: 28.2 %
Vehicle speed: 0 km/h
Coolant temperature: 16 ∞C
Intake air temperature: 12 ∞C
Ambient air pressure: 990 mbar
Voltage terminal 30: 11.746 V
Unlearning counter according OBD: 40
Glow status-STATE_GLOW: 176
Fuel temperature-TFU: 14 ∞C
Sensor for engine block temperature: raw value-Coolant temperature: 25 ∞C


Readiness: 0000 0000


-------------------------------------------------------------------------------
Address 03: ABS Brakes (-----) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 AN HW: 1K0 907 379 AN
Component: ESP MK60EC1 H45 0107
Revision: 00H45001
Coding: 133B200D092900FCC80C04E6901C00803000
Shop #: WSC 00028 028 00001
VCID: 7EF398DDE926E6B1BD-802A


1 Fault Found:
01314 - Engine Control Module
013 - Check DTC Memory - Intermittent
Freeze Frame:
Fault Status: 00101101
Fault Priority: 2
Fault Frequency: 1
Reset counter: 211
Mileage: 42609 km
Time Indication: 0
Date: 2011.07.14
Time: 18:45:25


Freeze Frame:
Count: 2
Count: 0
Count: 13056
Count: 8193
Count: 43520
Count: 60929
Count: 0
Count: 0


Please could you advise me on how I can tackle these codes.
Thanks in advance!

[c4a5er]

Hi All

I recently ran VCDS on my VW GOLF MK6 1.6TDI and the following codes appeared.
Address 01: Engine (J623-CAYC) Labels: 03L-906-023-CAY.clb
Part No SW: 03L 906 023 B HW: 03L 906 023 A
Component: 1,6l R4 CR td H23 9971
Revision: --H23--- Serial number: 00000000000000
Coding: 00114014030500080000
Shop #: WSC 64083 001 1048576
ASAM Dataset: EV_ECM16TDI02103L906023B 003011
ROD: EV_ECM16TDI02103L906023DB.rod
VCID: 254197B1243095699C-8070


2 Faults Found:
6158 - Internal Control Module
P0601 00 [096] - Memory Check Sum Error
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Date: 2000.00.00
Time: 00:00:00


Engine speed: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 93 ∞C
Intake air temperature: 29 ∞C
Ambient air pressure: 990 mbar
Voltage terminal 30: 8.019 V
Unlearning counter according OBD: 2
EEPROM malfunction status-FRF_EEPROM: 0
Hardware monitoring of EEPROM status-FRF_HWMT_EEPROM: 3
Coding in the engine control module-FRF_VARCOD: 3
Immobilizer snapshot A: FF


10165 - Glow Plug Module 1; Glow Plug Circuit
P0670 00 [237] - Electrical Malfunction
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 45459 km
Date: 2017.03.20
Time: 07:44:17


Engine speed: 801.00 /min
Normed load value: 28.2 %
Vehicle speed: 0 km/h
Coolant temperature: 16 ∞C
Intake air temperature: 12 ∞C
Ambient air pressure: 990 mbar
Voltage terminal 30: 11.746 V
Unlearning counter according OBD: 40
Glow status-STATE_GLOW: 176
Fuel temperature-TFU: 14 ∞C
Sensor for engine block temperature: raw value-Coolant temperature: 25 ∞C


Readiness: 0000 0000


-------------------------------------------------------------------------------
Address 03: ABS Brakes (-----) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 AN HW: 1K0 907 379 AN
Component: ESP MK60EC1 H45 0107
Revision: 00H45001
Coding: 133B200D092900FCC80C04E6901C00803000
Shop #: WSC 00028 028 00001
VCID: 7EF398DDE926E6B1BD-802A


1 Fault Found:
01314 - Engine Control Module
013 - Check DTC Memory - Intermittent
Freeze Frame:
Fault Status: 00101101
Fault Priority: 2
Fault Frequency: 1
Reset counter: 211
Mileage: 42609 km
Time Indication: 0
Date: 2011.07.14
Time: 18:45:25


Freeze Frame:
Count: 2
Count: 0
Count: 13056
Count: 8193
Count: 43520
Count: 60929
Count: 0
Count: 0


Please could you advise me on how I can tackle these codes.
Thanks in advance!
Voltage readings suggest your having battery issues...Perhaps replace or at least charge the battery then see if the codes will clear.

[kiran28]

Thanks for your help. I will try this asap!