OEM Reverse Camera

[dan2485]

I have just fitted an OEM reverse camera to my car which has 3g MMI basic and it worked, i was thinking that it would be a waste of time as Elsawin said that in J794 MMI pinout this was a MMI high option.

I have a small set back in that the Can Gateway has registered a Component Protection fault with no noticeable affect on the car, so a trip to the dealer or a specialist is now on the cards, I do have CP active for my DAB also but the firmware update sorted this out as the radio is fine but the code remained.

A few screen shots it was dark when they where taken.

After the CP is removed i will do the calibration and write up How to guide.

http://i258.photobucket.com/albums/hh249/dan2485/IMG_1305_zpsqz8frjx4.jpg

http://i258.photobucket.com/albums/hh249/dan2485/IMG_1328_zpsbyx1hji0.jpg

http://i258.photobucket.com/albums/hh249/dan2485/IMG_1306_zpsfjkkna7h.jpg


I had a blown PDC module Fuse hence the lost PDC mark in the pictures, now all sorted.

http://i258.photobucket.com/albums/hh249/dan2485/IMG_1339_zpsigp0jqme.jpg

The CP has been removed i just need to check that the calibration is ok.