Audi A4 '11 plate - High Beam Assist

[blackquat]

Good Afternoon,
I am new to the forum and have a question.
I'm looking to retrofit high beam assist to our 2011 A4.
From what I can see, I need a rear view mirror with the camera, two wires into the can and coding.
But I'm now unsure if my gateway will take HBA
MY Can is 8T0 907 468 K

Has anyone any idea if it will?

Thank you

[Gunnark100]

No idea, you could contact kufatec.uk they are updating/flashing gateways aswell and selling harness etc for this mod...you will get 100% answer from there.




Good Afternoon,
I am new to the forum and have a question.
I'm looking to retrofit high beam assist to our 2011 A4.
From what I can see, I need a rear view mirror with the camera, two wires into the can and coding.
But I'm now unsure if my gateway will take HBA
MY Can is 8T0 907 468 K

Has anyone any idea if it will?

Thank you

[blackquat]

Thank you for your reply. I have messaged them and see what happens.

Thank you.

[Gunnark100]

Thank you for your reply. I have messaged them and see what happens.

Thank you.

They will probably say its not ok, as k Has no extended can,and looks like no use for this mod, but instead of new flash they will offer new gateway. You may find some other retrofit company in uk(if thats the case), who will be able to flash your gateway, itS cheaper, if k can be flashed with newer soft(should be - not sure). My gateway was flashed for other mod, which originaly did not support, so maybe same possibility for you with HBA.

[blackquat]

Cheers guys! They've emailed back asking for my VIN number.