Help in reading VCDS output

[enrico-1979]

Hi all, I am new on this nice forum.

Could you please give me some help in reading the VCDS output? I guess there is something odd in some fields.
It is a golf Plus TDI 2.0 year 2005, used car, now the car has a failure due to pressure oil but I want to be sure that miles are real.

1. Revision 12345678... Is it good? It seems so strange value.
2. Flash attempt 0: this could be safe for the health of the ECU but flash date does not refer to the date of manufacturing of the ECU itself?
3. Is there a way to determine where is the workshop starting from the workshop code?
4. The date is one year younger than the date written on the car circulation book.

Friday,21,August,2015,09:53:28:41339
VCDS Version: Release 11.11.2
Address 01: Engine
Control Module Part Number: 03G 906 016 T
Component and/or Version: R4 2,0L EDC 0000SG 7001
Software Coding: 0000072
Work Shop Code: WSC 01392
VCID: 34484E9057204E3


Advanced Identification
Serial number: VWZ7Z0E160xxxx last digit omitted
Identification: BPG-810
Revision: 12345678
Date: 31.01.05
Test stand number: 1884
Manufacturer number: 1070
Flash Status
Programming Attempts: 0
Successful Attempts: 0
Programming Status: 00000000
Required Conditions: 00000000
Flash Tool Code: 00000 000 00000
Flash Date: 00.00.00
Software
P0101
A20.43E
Misc.
Hardware number: 028 101 195 6
Car Info
Chassis Number: <omitted>


Hope this is not boring for expert forum users.

Thanks

[Lukenkarl]

Hi all, I am new on this nice forum.

Could you please give me some help in reading the VCDS output? I guess there is something odd in some fields.
It is a golf Plus TDI 2.0 year 2005, used car, now the car has a failure due to pressure oil but I want to be sure that miles are real.

1. Revision 12345678... Is it good? It seems so strange value.
2. Flash attempt 0: this could be safe for the health of the ECU but flash date does not refer to the date of manufacturing of the ECU itself?
3. Is there a way to determine where is the workshop starting from the workshop code?
4. The date is one year younger than the date written on the car circulation book.

Friday,21,August,2015,09:53:28:41339
VCDS Version: Release 11.11.2
Address 01: Engine
Control Module Part Number: 03G 906 016 T
Component and/or Version: R4 2,0L EDC 0000SG 7001
Software Coding: 0000072
Work Shop Code: WSC 01392
VCID: 34484E9057204E3


Advanced Identification
Serial number: VWZ7Z0E160xxxx last digit omitted
Identification: BPG-810
Revision: 12345678
Date: 31.01.05
Test stand number: 1884
Manufacturer number: 1070
Flash Status
Programming Attempts: 0
Successful Attempts: 0
Programming Status: 00000000
Required Conditions: 00000000
Flash Tool Code: 00000 000 00000
Flash Date: 00.00.00
Software
P0101
A20.43E
Misc.
Hardware number: 028 101 195 6
Car Info
Chassis Number: <omitted>


Hope this is not boring for expert forum users.

Thanks
Re No 2 Flash attempt 0 means ECU has not been reflashed or mapped.

[enrico-1979]

Thanks for your answer Lukencarl.


What about revision 12345678? It is like putting password '1234' on your email account... Sounds really strange, someone knows why?

[enrico-1979]

At the end the problem was due to bad quality gasoline, changed the fuel filter and now the car is OK!

thanks for your help