PDA

View Full Version : 2.0fsi Supercharger



Sterobbo91
20-08-2015, 06:27 PM
Hey guys,
Ive been doing some research into upgrading my 2.0fsi and putting a supercharger on, I have found a supercharger for the 3.2 but I can't find one for mine. Would they same supercharger fit? Or does any body know of any one who has gone down this route or point me in the right direction?

zollaf
20-08-2015, 06:31 PM
lol, how deep are your pockets. you can't just bolt a charger on and go for a drive, you will need lots of other bits, like a thicker head gasket or low comp pistons and of course someone to map it. why not just buy one with a tfsi in it or better still one with twice the capacity and twice as many cylinders and begins with s. it would work out cheaper, especially when you stick a rod through the block and have to replace the standard engine, this time using forged rods and crank etc....

Sterobbo91
20-08-2015, 09:33 PM
Pretty pointless then? I had seen a few posts on American sites about it, so I was just seeing what opinions where.