PDA

View Full Version : Passenger foglight bulb change



Shakeeb_5
17-05-2015, 11:12 PM
Hello
i know there are already a few posts on foglight bulb changing but i don't believe any answer my question
my car is an 08 plate se, i've managed to change the driver side foglight bulb by squeezing my hand through the grill, however the passenger side is a bit harder
a lot of people say to remove the front bumper but i think this is excessive. I've removed the wheel arch from passenger side but theres a water bottle blocking access. I've read on another post you can squeeze your hand through there but was wanting to know if that involved unscrewing just the passenger side bumper, leaving the rest of it on
also i was wanting to know if i jacked the car up, removed the plastic shield under the engine could i squeeze my hand through or is it remove the bottom plastic protecting the engine and then unscrew the bottom screws of the bumper and then if it is possible?

i'd like to avoid removing the whole bumper as i'd have to pay a garage to do it-not compotent to do that myself 😂

i have skinny arms so as long as i can get a grip onto the bulb somehow i'll manage to take it off