Will these fit with work

[gez77]

Item specifics



Condition:
New
Rim Material:
Alloy


Bolt Pattern:
5x114.3
Rim Width:
9.5 F/11 R


Hub Bore:
73.1
Rim Diameter:
19


Rim Brand:
ZEDD
Offset:
12 Front, 15 Rear


Rim Structure:
One Piece
Number of Bolts:
5




They will be with hub adaptors which adds 20mm

[Guest 2]

9.5J front and 11J rear even without considering the uber low offset they'll not fit.

Bolt pattern is wrong too.

[gez77]

9.5J front and 11J rear even without considering the uber low offset they'll not fit.

Bolt pattern is wrong too.


Why wont they fit then?? thats what the hub adaptor is for to change the pattern from 5x112 to 5x114.3

[Guest 2]

They're far too wide, the arches on the a6 aren't wide at all. A 9J rim with ET33 won't fit, I've tried.

[gez77]

were they hitting the inside or out side

[Guest 2]

They were too close to the arch and would've caught on full lock.

[gez77]

What about rolling them or flaring them

[Guest 2]

That's not something I'd do as its a lot of work and to go back to stock you'll pay. But whatever floats your boat I suppose.

[gez77]

nar i don't want to be doing it that much. i will choose different wheels, thanks for the help tho