Drivers side electrical problems Golf GT 2.0 FSI

[Shave]

Hi. This is my first post on a forum so go easy on me.
I've got a 2004 Mk5 Golf GT 2.0 FSI. Not had it very long but running into problems already, all electrical and mostly drivers side (all except nav) but I'm sure they're connected. Right, here goes! Drivers mirror/switch - I press up on the switch, it goes right, I press down, it goes left, I press left, it goes up and so on. Power fold mirrors - I turn the dial to fold the mirrors in, left one works fine, drivers mirror folds out the wrong way. Drivers window works but one touch up and down will not work (have tried resetting the limits), passenger windows both work fine on one touch, drivers rear will only auto one way. Stereo/nav (mfd2) - will not turn on with ignition, have to do it manually every time I turn the car on, turns off before I take the key out of the ignition, won't remember where I was on cd but remembers radio stations settings etc. Sometimes get a bulb failure light on dash but goes once I cycle through from auto to dipped and back again.
Had it on vag com today (wouldn't print results though which is really annoying) but all the mechanic said was it was showing faults in all items I mentioned.
Not sure if it could be a problem with a module?
Pulling my hair out here so any help would be great!
Cheers.

[Flash2]

If you can get vag com back on it, check the coding of the door control units just in case somebody has been messing with it.

Here is sample coding from another 2004 Golf (3 door model) that might help confirm if yours is correct :




Driver-side door electronics - MIDI

Part No : 1K0 959 701E

Coding 52

------------

Passenger-side door electronics - MIDI

Part No : 1K0 959 702E

Coding 52

[Shave]

If you can get vag com back on it, check the coding of the door control units just in case somebody has been messing with it.

Here is sample coding from another 2004 Golf (3 door model) that might help confirm if yours is correct :




Driver-side door electronics - MIDI

Part No : 1K0 959 701E

Coding 52

------------

Passenger-side door electronics - MIDI

Part No : 1K0 959 702E

Coding 52

Ok, thanks. Will get it back on this week. Mine is a 5 door, does that matter?

[Flash2]

Coding on a 5 door models will probably be different but I'd guess both the N/S & O/S doors should have the same coding number. So check the coding of your passenger door and see if that matches the drivers.
If not, take a note of the original coding number of your driver's door, then change the coding to the same number as the passenger door and see if that changes anything. If it doesn't fix it, just re-enter the original coding.

Jim.

[Flash2]

Update : Just checked a 4 door model and it also has a coding of 52 on each door too. Yours may have a different number because yours is a higher spec model. You could enter 52 in both your doors (if they're different) and see if that changes the way the mirror is working. Just be sure to keep a note of the original coding numbers before making changes so you change it back if you need to.

Jim.

[Shave]

Update : Just checked a 4 door model and it also has a coding of 52 on each door too. Yours may have a different number because yours is a higher spec model. You could enter 52 in both your doors (if they're different) and see if that changes the way the mirror is working. Just be sure to keep a note of the original coding numbers before making changes so you change it back if you need to.

Jim.

Hi Jim. I've had a look at the coding today. The passenger door is on 54 and the drivers door is on 677. I changed the drivers door to 54 as well but it just started controlling the passenger door so I changed it back.

Anyway, did a full scan and here are the results :

00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Sporadic communication error 1000
42-Door Elect, Driver -- Status: Sporadic communication error 1000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: Malfunction 0010
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: Malfunction 1010
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
76-Park Assist -- Status: OK 0000
=20
-------------------------------------------------------------------------=
------
Address 01: Engine Labels: None
Part No SW: 06F 906 056 DE HW: Hardware No=20
Component: MED9.5.10 00 6304 =20
Revision: 00000000 Serial number: VWZ7Z0D9943604
Coding: 0000072
Shop #: WSC 01392 785 00200
VCID: 6FE7CD657E862D1

Part No: 06F 907 807 D
Component: NOX 0406290103 006 4109
06F907807D NOX 0406290103 006 4109 =20

1 Fault Found:
16575 - Fuel Pressure Sensor (G247)=20
P0191 - 008 - Implausible Signal - Intermittent
Readiness: 0000 0000

-------------------------------------------------------------------------=
------
Address 03: ABS Brakes Labels: 1K0-907-379-MK60-F.lbl
Part No: 1K0 907 379 K
Component: ESP FRONT MK60 0103 =20
Coding: 0021122
Shop #: WSC 01392 785 00200
VCID: 3A712C317544B89

No fault code found.

-------------------------------------------------------------------------=
------
Address 08: Auto HVAC Labels: 1K0-907-044.lbl
Part No: 1K0 907 044 AC
Component: ClimatronicPQ35 066 0404 =20
Shop #: WSC 00000 000 00000
VCID: 68D5A6795B68FA9

No fault code found.

-------------------------------------------------------------------------=
------
Address 09: Cent. Elect. Labels: 3C0-937-049-23-H.lbl
Part No SW: 1K0 937 049 T HW: 1K0 937 049 T*
Component: Bordnetz-SG 1.0 H30 0704 =20
Revision: 00030000 Serial number: 00000000859288
Coding: E58D8F0600041800001400001400000000
Shop #: WSC 00000 000 00000
VCID: 40855ED91398E29

Subsystem 1 - Part No: 1K2 955 119 B Labels: 1KX-955-119.CLB
Component: Wischer VW350 012 0401 =20
Coding: 00065493
Shop #: WSC 00000 =20

Subsystem 2 - Part No: 1K0 955 559 M Labels: 1K0-955-559-AF.CLB
Component: RegenLichtSens 005 0605 =20
Coding: 00217125
Shop #: WSC 00000 =20

2 Faults Found:
01520 - Rain and Light Recognition Sensor (G397)=20
008 - Implausible Signal - Intermittent
01331 - Door Control Module; Driver Side (J386)=20
004 - No Signal/Communication - Intermittent

-------------------------------------------------------------------------=
------
Address 15: Airbags Labels: 1K0-909-605.lbl
Part No SW: 1K0 909 605 D HW: 1K0 909 605 D
Component: 02 AIRBAG VW8 022 0600 =20
Revision: 05022000 Serial number: 0033JD0FKRP$ =20
Coding: 0012338
Shop #: WSC 01371 785 00200
VCID: 2D5B176DB40A1F1

No fault code found.

-------------------------------------------------------------------------=
------
Address 16: Steering wheel Labels: 1K0-953-549-MY8.lbl
Part No SW: 1K0 953 549 A HW: 1K0 953 549 A
Component: Lenks=E4ulenmodul 012 0030 =20
Coding: 0000012
Shop #: WSC 01392 785 00200
VCID: 30650E19A338729

No fault code found.

-------------------------------------------------------------------------=
------
Address 17: Instruments Labels: 1K0-920-xxx-17.lbl
Part No: 1K0 920 971 A
Component: KOMBIINSTRUMENT VDD 0812 =20
Coding: 0003403
Shop #: WSC 00581 210 64475
VCID: 2953E37D80E2031

No fault code found.

-------------------------------------------------------------------------=
------
Address 19: CAN Gateway Labels: 1K0-907-530.lbl
Part No SW: 1K0 907 530 C HW: 1K0 907 951=20
Component: Gateway H08 0080 =20
Revision: 08 Serial number: 260010462407BF
Coding: 3D3F0748070003
Shop #: WSC 01392 785 00200
VCID: 2757E54596F6351

4 Faults Found:
01305 - Databus for Infotainment=20
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 1
Fault Frequency: 254
Reset counter: 7
Mileage: 193683 km
Time Indication: 0
Date: 2000.00.00
Time: 14:49:36

01300 - Control Module for Navigation with CD-Rom (J401)=20
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 254
Reset counter: 7
Mileage: 193683 km
Time Indication: 0
Date: 2000.00.00
Time: 14:49:37

01304 - Radio=20
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 254
Reset counter: 7
Mileage: 193683 km
Time Indication: 0
Date: 2000.00.00
Time: 14:49:37

01331 - Door Control Module; Driver Side (J386)=20
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 5
Mileage: 193917 km
Time Indication: 0
Date: 2000.00.00
Time: 09:32:44


-------------------------------------------------------------------------=
------
Address 25: Immobilizer Labels: 1K0-920-xxx-25.clb
Part No: 1K0 920 971 A
Component: IMMO VDD 0812 =20
Shop #: WSC 00000 000 00000
VCID: 2953E37D80E2031

No fault code found.

-------------------------------------------------------------------------=
------
Address 37: Navigation Labels: 1T0-919-887.lbl
Part No: 1T0 919 887 C
Component: Navigation 0413 =20
Coding: 0000002
Shop #: WSC 01392 785 00200
VCID: 428154D11D94F09

No fault code found.

-------------------------------------------------------------------------=
------
Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX2.lbl
Part No: 1K0 959 701 L
Component: Tuer-SG 024 2468 =20
Coding: 0000677
Shop #: WSC 00000 000 00000
VCID: 377735054656A51

No fault code found.

-------------------------------------------------------------------------=
------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K2 909 144 G
Component: EPS_ZFLS Kl.2 1301 =20
Shop #: WSC 00000 000 00000
VCID: 30650E19A338729

No fault code found.

-------------------------------------------------------------------------=
------
Address 46: Central Conv. Labels: 1K0-959-433-MIN.clb
Part No SW: 1K0 959 433 J HW: 1K0 959 433 J
Component: 01 KSG PQ35 G2 031 0308 =20
Revision: 00031000 Serial number: 00000000000000
Coding: 81C802087F2D8505485FC69000
Shop #: WSC 00357 210 63736
VCID: 377735054656A51

Part No: 1K0 951 605 A
Component: LIN BACKUP HORN H01 1201

Part No: 1K0 907 719=20
Component: Neigungssensor 003 0003

Part No: 1K0 951 177=20
Component: Innenraumueberw.004 0101

1 Fault Found:
01331 - Door Control Module; Driver Side (J386)=20
004 - No Signal/Communication - Intermittent

-------------------------------------------------------------------------=
------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX1.lbl
Part No: 1K0 959 702 G
Component: Tuersteuergeraet 09 0148 =20
Coding: 0000054
Shop #: WSC 01392 785 00200
VCID: 336F0115522E491

No fault code found.

-------------------------------------------------------------------------=
------
Address 56: Radio Labels: 1T0-035-095.lbl
Part No: 1T0 035 095=20
Component: Radio 0413 =20
Coding: 0001402
Shop #: WSC 01392 785 00200
VCID: EBDF5975CA9E511

1 Fault Found:
00857 - CD Changer Unit (R41)=20
003 - Mechanical Failure

-------------------------------------------------------------------------=
------
Address 62: Door, Rear Left Labels: 1K0-959-703-GEN1.lbl
Part No: 1K0 959 703 C
Component: Tuersteuergeraet 06 0202 =20
Coding: 0000016
Shop #: WSC 01392 785 00200
VCID: 30650E19A338729

No fault code found.

-------------------------------------------------------------------------=
------
Address 72: Door, Rear Right
Cannot be reached

-------------------------------------------------------------------------=
------
Address 76: Park Assist Labels: 1K0-919-283.lbl
Part No: 1K0 919 283 A
Component: 01 Einparkhilfe 0101 =20
Shop #: WSC 00000 000 00000
VCID: 2D5B176DB40A1F1

No fault code found.

Is it me or is everything pointing to the drivers door control module?

Cheers,
Dave

[Flash2]

Well, it looks like the driver door control module has maybe already been replaced. The part number suffix is L on the driver door and G on the passenger door. On the diag logs I have, the two doors have the same suffix. That's not to say that in itself is the problem but maybe someone has replaced the module to try and fix this fault before.

I also notice that VCDS can't communicate with the right rear door. The front & rear door modules are linked. Communication with the rear doors is via the front door modules. The communication faults could be due to wiring damage in the loom between the car body and the door. It might be worth popping off the rubber tubing where the wiring routes into the door and see if there is any damage. Here is a link that might be worth a read :
Door wiring harness -cracked wire replacement - mk5 VW | VW TDI forum, Audi, Porsche, and Chevy Cruze diesel forum (http://www.myturbodiesel.com/wiki/door-wiring-harness-cracked-wire-replacement-mk5-vw/)

Jim.

[Shave]

Update : Just checked a 4 door model and it also has a coding of 52 on each door too. Yours may have a different number because yours is a higher spec model. You could enter 52 in both your doors (if they're different) and see if that changes the way the mirror is working. Just be sure to keep a note of the original coding numbers before making changes so you change it back if you need to.

Jim.


Well, it looks like the driver door control module has maybe already been replaced. The part number suffix is L on the driver door and G on the passenger door. On the diag logs I have, the two doors have the same suffix. That's not to say that in itself is the problem but maybe someone has replaced the module to try and fix this fault before.

I also notice that VCDS can't communicate with the right rear door. The front & rear door modules are linked. Communication with the rear doors is via the front door modules. The communication faults could be due to wiring damage in the loom between the car body and the door. It might be worth popping off the rubber tubing where the wiring routes into the door and see if there is any damage. Here is a link that might be worth a read :
Door wiring harness -cracked wire replacement - mk5 VW | VW TDI forum, Audi, Porsche, and Chevy Cruze diesel forum (http://www.myturbodiesel.com/wiki/door-wiring-harness-cracked-wire-replacement-mk5-vw/)

Jim.

Forgot to add this:
Wednesday,22,April,2015,17:17:18:32264
VCDS Version: Release 11.11.3
Data version: 20120401



-------------------------------------------------------------------------=
-------
-------------------------------------------------------------------------=
-------


Address 42: Door Elect, Driver Labels: =
1K0-959-701-MAX2.lbl
Control Module Part Number: 1K0 959 701 L
Component and/or Version: Tuer-SG 024 2468
Software Coding: 0000677
Work Shop Code: WSC 00000 000 00000
VCID: 377735054656A51
1 Fault Found:

00932 - Electric Window Motor; Drivers Side (V147)=20
005 - No or Incorrect Basic Setting / Adaptation - =
Intermittent
Wednesday,22,April,2015,17:36:11:32264
VCDS Version: Release 11.11.3
Data version: 20120401



-------------------------------------------------------------------------=
-------
-------------------------------------------------------------------------=
-------


Address 42: Door Elect, Driver Labels: =
1K0-959-701-MAX2.lbl
Control Module Part Number: 1K0 959 701 L
Component and/or Version: Tuer-SG 024 2468
Software Coding: 0000677
Work Shop Code: WSC 00000 000 00000
VCID: 377735054656A51
1 Fault Found:

01552 - Motor for Central Locking; Drivers Door (V56); Lock=20
012 - Electrical Fault in Circuit

Interestingly, I just looked up the '00932' fault code and it says "incorrect window motor/door control module installed"
So with that in mind and you noticing that the part number is different, I'm just wondering if someone has had a go at it before and installed the wrong part.
Think I might call VW tomorrow to see if they'll give me the correct part number and/or coding in case that is wrong, before I start taking the door apart.

Thanks for all your help, I'll update you with any progress.

Dave.

[Flash2]

In my experience, the 00932 code is normally logged because the window up/down limits haven't been set for the one touch operation, but you said you had already tried to set them in your original post.

The parts guys at your local dealer should be able to tell you if the part number is correct for your chassis number, but they wont be able to advise you on the correct coding because that depends on the what vehicle the part is to be fitted to. I'd be surprised if a parts guy even knew what coding was. I'm pretty sure nobody in the parts at my local dealership would have a clue, and having seen some of the techs there, I'm not sure they would know either :)

[Shave]

In my experience, the 00932 code is normally logged because the window up/down limits haven't been set for the one touch operation, but you said you had already tried to set them in your original post.

The parts guys at your local dealer should be able to tell you if the part number is correct for your chassis number, but they wont be able to advise you on the correct coding because that depends on the what vehicle the part is to be fitted to. I'd be surprised if a parts guy even knew what coding was. I'm pretty sure nobody in the parts at my local dealership would have a clue, and having seen some of the techs there, I'm not sure they would know either :)


Just a quick update. Dealer didn't want to pay to have the car repaired so he offered to give me my money back. Bit sad to let the car go - then I bought myself a GTI which made up for it!
Thanks for your help, much appreciated!