PLEASE HELP - A4 B6 Cabriolet 2.5TDI Cruise Control Retrofit & VCDS

[jamin128]

I am hoping someone can help me .... please!!!

I have fitted the steering control module below, and am having problems coding it to my car.
ABS, STEERING ANGLE ETC.

Is the module below compatible with an A4 B6 Cabriolet (http://www.amazon.co.uk/-/dp/B006057T8U) ?
The module is from an A4 B7 Cabriolet.
I am also struggling with VCDS, I found it easier to use on my A4 B8, but really struggling getting my head around it for the Cabriolet.




t.2749527496

[ReinS]

Hi!
Did you get any help? Installed exact same module from B7 Cabrio to my B6 saloon few months ago, so i can't see reason why it shouldn't work. Now the tricky part. Did you perform full auto scan with VCDS and saved it before replaced module? If not, then brake coding need to figure out. Now you have brake coding 00000, isn't it? Do you know what is your car brakes PR-Code? Also car don't recognise new module(VIN fault code) in 16-Steering wheel? There is some actions that need to do in correct order. If not then fault codes not clear. If you get done with this, it's great. If not, then better send me your email, cause this would be quite a lot of writing.

[jamin128]

Good evening, thank you for getting back to me.
Fingers crossed, i think its all sorted now :-)
I was coding the wrong brakes!!!!

[ReinS]

Glad to hear that you sorted this out. Full autoscan saving to log would be great thing to do if you replace modules. Save a lot of time for coding. Ask me how do i know ;).