Change Suspension Height Without MMI

[motionpotion]

My MMI screen is getting a bit flakey on my 2006 Allroad. This morning it took ages to start up & the car was in Allroad setting overnight.

Is it possible to adjust the suspension height without using the MMI?

[MarkTM]

You can with VCDS apparently, a quick google showed this:

Ross-Tech: VAG-COM: Suspension Level Control Calibration (http://www.ross-tech.com/vag-com/cars/levelcontrol.html)

Suspension Leveling Calibration - YouTube (https://www.youtube.com/watch?v=o2aeQ6bhu-Y)

[motionpotion]

No way to do it without VCDS & without the screen turned on it seems.

If you don't have VCDS & the car is stuck in Allroad setting its gonna be a slow drive to the Audi dealer.

[royclark]

No way to do it without VCDS & without the screen turned on it seems.

If you don't have VCDS & the car is stuck in Allroad setting its gonna be a slow drive to the Audi dealer.

You can probably buy a VCDS for what it will cost for one visit & fix at Audi dealership.

[B5NUT]

If the screen is just fault that is easy enough to replace and you can pick used ones up for around £80-£100.

[motionpotion]

So my learning from this is to just leave the car in automatic setting when parking. Which doesn't really work for me because the rear left deflates when in every setting except Allroad.